Configure settings to enable use of IPsec on this machine.
The IPsec technology prevents the falsification or leakage of data on the IP packet basis by using encryption technology. As IPsec encrypts data in the network layer, secure communication is ensured even if you use protocols in an upper layer or applications that do not support encryption.
Settings | Description | |
---|---|---|
[IPsec Settings] | Specify parameters required for IPsec communication. You can configure IKE (Internet Key Exchange), SA (Security Association), IPsec peer, or IPsec protocol settings. | |
[IKE Settings] | Configure settings required to create a common key for IPsec. For details, refer to Here. | |
[IPsec SA Settings] | Configure SA (Security Association) required for encrypted communication. For details, refer to Here. | |
[Peer] | Register the peer of this machine to use IPsec. For details, refer to Here. | |
[Protocol Setting] | Specify a protocol used for IPsec communication. For details, refer to Here. | |
[Enable IPsec] | Configure settings to enable use of IPsec on this machine. Also, specify the policy for IPsec communication. For details, refer to Here. | |
[Communication Check] | Select this option to confirm IPsec communication error logs. For details, refer to Here. |
Specify an IPv4 address of a computer to which you want to deny access to this machine.
Settings | Description |
---|---|
[Enable]/[Disable] | Select whether to specify an IPv4 address that denies access to this machine. [Disable] is specified by default. |
[Set 1] to [Set 5] | Enter the range of IPv4 addresses that deny access using the following format.
|
Specify an IPv4 address of a computer to which you want to allow access to this machine.
Settings | Description |
---|---|
[Enable]/[Disable] | Select whether to specify an IPv4 address that allows access to this machine. [Disable] is specified by default. |
[Set 1] to [Set 5] | Enter the range of IPv4 addresses that allow access using the following format.
|
Specify an IPv6 address of a computer to which you want to deny access to this machine.
Settings | Description |
---|---|
[Enable]/[Disable] | Select whether to specify an IPv6 address that denies access to this machine. [Disable] is specified by default. |
[Set 1] to [Set 5] | Enter the IPv6 address and prefix length to specify the range of IPv6 addresses that deny access. |
Specify an IPv6 address of a computer to which you want to allow access to this machine.
Settings | Description |
---|---|
[Enable]/[Disable] | Select whether to specify an IPv6 address that allows access to this machine. [Disable] is specified by default. |
[Set 1] to [Set 5] | Enter the IPv6 address and prefix length to specify the range of IPv6 addresses that allow access. |
Select whether to use IEEE802.1x authentication. To use IEEE802.1x authentication, check the authentication status and configure the certification verification items.
Using IEEE802.1x authentication enables you to only connect devices authorized by administrators to the LAN environment. Devices that are not authenticated will not be allowed to even join the network, and this ensures rigid security.
Settings | Description |
---|---|
[ON]/[OFF] | Select whether to use IEEE802.1x authentication. [OFF] is specified by default. |
[Auth. Status] | Displays the status of IEEE802.1x authentication on this machine. |
[Reset Job Settings] | Reset the current setting. |
[Certificate Verification Level Settings] | To verify the certificate, select items to be verified.
|
Summarizes settings to enhance the security of this machine. We recommend that you change settings in order to use this machine more securely.
Settings | Description |
---|---|
[Administrator Password] | Change the administrator password of this machine. For details, refer to Here. |
[Password Rules] | Configure whether to enable the password rules. Once you enable it, the number of characters and text types that are available for passwords is restricted. If necessary, change the minimum number of password characters. For details, refer to Here. |
[Quick IP Filtering] | Allows you to restrict the devices that can access this machine using the IP address (IPv4/IPv6). The range of IP addresses for which access is to be restricted is specified automatically. For details, refer to Here. |
[PSWC Setting] | Select whether to use Web Connection. For details, refer to Here. |
[Security Warning Display Setting] | Select whether to display the security warning screen if the administrator password remains set to the default or if password rules are not satisfied. For details, refer to Here. |
If necessary, change the administrator password of this machine. Be sure to remember the changed password so that you do not forget it.
Enter the current administrator password before setting a new administrator password.
Settings | Description |
---|---|
[Password] | Enter a new administrator password (using up to 64 characters). |
[Password Confirmation] | Retype the new administrator password for confirmation. |
If you enter an incorrect administrator password a configured number of times, you are prohibited from using this machine. In this case, contact your service representative.
From those items that are set up by the administrator, select levels at which users are authorized to change settings. [Prohibit] is specified by default.
Configure the settings you have opened up to users in [User Settings].
Settings | Description |
---|---|
[Level 1] | Open up the following settings to the users.
|
[Level 2] | Open up the following settings to the users.
|
[Prohibit] | The settings are not opened up to users. |
Configure whether to enable the password rules. Once you enable it, the number of characters and text types that are available for passwords is restricted. If necessary, change the minimum number of password characters.
Settings | Description |
---|---|
[Enable]/[Invalid] | Select whether to enable Password Rules. Before enabling Password Rules, change the current password to the one that complies with the password rules. [Invalid] is specified by default. Once Password Rules is enabled, the following rules are applied to any password that is configured on this machine.
The password rules are applied to:
|
[Set Minimum Password Length] | If you enable Password Rules, change the minimum number of characters for a password, as required. |
Define the severity of penalties applied if an incorrect password is entered during the authentication process.
Settings | Description |
---|---|
[Prohibit Functions When Auth. Error] | Select the severity of penalties applied if an incorrect password is entered during the authentication process.
[Mode 1] is specified by default. |
[Release] | Select an item to be released from Access Lock during authentication failure. |
[Release Time Settings] | If necessary, change the time that elapses before an access lock state in the Administrator Setting mode is canceled. If a predetermined time has elapsed after the machine was restarted, an access lock state is canceled. [5] minutes is specified by default. |
Specify how to enter an ID and a password when accessing to a file in the Secure Print User Box. This function is forced determined in conjunction with [Prohibited Functions When Authentication Error]. [Mode 1] is specified by default.
Settings | Description |
---|---|
[Mode 1] | Displays all files when the ID and password specified in the printer driver are entered. Select a desired file and print it. |
[Mode 2] | Displays all files when the ID specified in the printer driver are entered. To print, select your desired file, then enter the appropriate password for each file. |
Select whether to allow the user to directly enter destinations. [Allow All] is specified by default.
Settings | Description |
---|---|
[Allow All] | Allows the direct input of destinations. |
[Individual Allowance] | Select whether to allow direct input for each function. |
[Restrict] | Prohibits the direct input of destinations. Hides [Direct Input] in the main screen in fax/scan mode. |
Select whether to restrict fax transmissions.
If [ON] (Restrict) is selected, the fax functions no longer appear in the fax/scan mode.
[OFF] (Allow) is specified by default.
Select whether to display the registered information of the selected destination each time a destination registered on this machine is selected as a recipient. This is helpful to prevent a transmission to the wrong destination.
[OFF] is specified by default.
This setting is displayed when [Restrict Broadcasting] is set to [OFF]. For details on [Restrict Broadcasting], refer to Here.
Specify whether to hide personal information, such as destination and file name, in [Active] and [Log] on the [Job List] screen.
Settings | Description | |
---|---|---|
[Job History] | Specify whether to hide personal information, such as destination and file name, in [Job History] in the [Job List] screen. The default is [No] (without user authentication/account track) or [Yes] (with user authentication/account track). | |
[Display Settings] | When you have selected [Yes], select items you want to hide.
| |
[Public User]/[User Authentication]/[Department] | Select how to display items you specified in [Display Settings] per Public User, User Authentication, and Authentication Track.
| |
[Current Job] | Specify whether to hide personal information, such as destination and file name, in [Active] in the [Job List] screen. The default is [No] (without user authentication/account track) or [Yes] (with user authentication/account track). | |
[Display Settings] | When you have selected [Yes], select items you want to hide.
| |
[Public User]/[User Authentication]/[Department] | Select how to display items you specified in [Display Settings] per Public User, User Authentication, and Authentication Track.
|
When logged in as an administrator or user box administrator, all personal information is displayed regardless of the settings.
Specify whether or not to display the file name, destination, and User Box name and number of the MIB information.
[ON] (hide) is specified by default.
Select whether to show the activity log on Scan, Fax TX and RX.
If [OFF] is selected, [Comm. List] does not appear on the [Job List] screen.
[ON] (display) is specified by default.
Initializes the settings in [Job History], [Copy Program], [Network Settings], [Address Registration], and [Enhanced Server Information].
Select items you want to initialize, then tap [OK].
Specify whether to allow an access to the Web page contents being saved on the hard disk of the MFP.
For details, contact your service representative.
[Allow] is specified by default.
Select whether to permit a change on the settings of this machine by loading the configuration file saved in USB memory.
[Allow] is specified by default.
Select whether to permit our service representative to back up or restore the hard disk on this machine.
[Restrict] is specified by default.
Select whether to enable the Enhanced Security Mode.
If you enable the Enhanced Security Mode, the various security functions are forcibly configured. This allows you to ensure higher-level security of data management. For details, contact your service representative.
To enable the enhanced security mode, the following settings must have been configured.
Setting items in Administrator Settings | Settings to forcibly changed |
---|---|
[User Authentication/Account Track] - [General Settings] - [User Authentication] | Set to [Authenticate]. |
[Security Settings] - [Administrator Password] | Set a password complying with password rules. |
[Security Settings] - [HDD Settings] - [HDD Encryption Setting] | Enable the HDD Encryption. |
In Web Connection, register the certificate. | For details, refer to Here. |
[Image Controller Setting] [Management Function Choice] [CE Password] [CE Authentication] [HDD] | These items must be configured by your service representative. For details, contact your service representative. |
If you enable the Enhanced Security Mode, the following settings are forcibly changed.
Setting items in Administrator Settings | Settings to forcibly changed |
---|---|
[System Settings] - [Restrict User Access] - [Restrict Access to Job Settings] - [Registering and Changing Addresses]* | Set to [Restrict]. |
[User Authentication/Account Track] - [General Settings] - [Public User Access]* | Set to [Restrict]. |
[User Authentication/Account Track] - [User Authentication Settings] - [Administrative Settings] - [User Name List]* | Set to [OFF]. |
[User Authentication/Account Track] - [Print without Authentication]* | Set to [Restrict]. |
[User Authentication/Account Track] - [User/Account Common Setting] - [Counter Remote Control] | Set to [Restrict]. |
[User Authentication/Account Track] - [Print Simple Auth.] - [Authentication Setting]* | Set to [Restrict]. |
[Network Settings] - [FTP Settings] - [FTP Server Settings]* | Set to [OFF]. |
[Network Settings] - [E-Mail Settings] - [S/MIME Communication Settings]* |
|
[Network Settings] - [SNMP Settings] - [SNMP v1/v2c Settings] - [Write Setting]* | Set to [Invalid]. |
[Network Settings] - [SNMP Settings] - [SNMP v3 Settings]* | [Security Level] for read and write allowed users is set to [auth-password/priv-password]. The Security Level can be changed to [auth-password]. |
[Network Settings] - [TCP Socket Settings] - [TCP Socket] - [Use SSL/TLS] | Set to [ON]. |
[Network Settings] - [WebDAV Settings] - [WebDAV Server Settings] - [SSL Setting] | Set to [SSL Only]. |
[Network Settings] - [Web Browser Setting] | Set to [Invalid]. |
[Network Settings]-[Remote Panel Settings]* |
|
[Network Settings] - [E-Mail Settings] - [E-mail RX Print]* | Set to [OFF]. |
[Network Settings] - [Machine Update Settings] - [Machine Auto Update setting]* | This function is not available. |
[Network Settings] - [IWS Settings]* | Set to [OFF]. |
[Fax Settings] - [Report Settings] - [Tx Result Report Print Setting] - [Tx Result Report Attachment (Yes/No)]* | Set to [Without Attachment]. |
[System Connection] - [OpenAPI Settings] - [SSL/Port Settings] - [SSL Setting] | Set to [SSL Only]. |
[System Connection] - [Mobile Connection Settings] - [QR Code Setting]* | Set to [OFF]. |
[Security Settings] - [User Box Administrator Setting]* | Set to [Restrict]. |
[Security Settings] - [Security Details] - [Password Rules]* | Set to [Enable]. If [Enable] cannot be selected for the Password Rules, you cannot enable the Enhanced Security Mode. |
[Security Settings] - [Security Details] - [Prohibited Functions When Authentication Error]* |
|
[Security Settings] - [Security Details] - [Confidential Document Access Method] | Set to [Mode 2]. |
[Security Settings] - [Security Details] - [Print Data Capture] | Set to [Restrict]. |
[Security Settings] - [Security Details] - [Hide Personal Information (MIB)] | Set to [ON]. |
[Security Settings] - [Security Details] - [Initialize]* | If you select [Network Settings] and start it, the Enhanced Security Mode is canceled |
[Remote Access Setting] - [Import/Export User Data] | Set to [Restrict]. |
[Maintenance] - [Import/Export] in Web Connection | The password must be configured. |
[Security] - [PKI Settings] - [Device Certificate Setting] in Web Connection | [Requesting Certificate] is hidden. |
Security - [PKI Settings] - [SSL Setting] in [Web Connection]* |
|
[Security] - [PKI Settings] - [Protocol Setting] in Web Connection | [Protocol 1]: [SSL], [Protocol 2]: The certificate is registered in the [http Server]. |
Remote Diagnosis System | Some functions may be disabled. For details, contact your service representative. |
[Security Settings] - [Image Log Transfer Settings]* | Set to [OFF]. |
Preview Secure Document User Box | Only the list is displayed before the password authentication is performed. |
[Security Settings] - [Maintenance Mode Permission] | Set to [Restrict]. |
If you change a setting item (marked by an asterisk *) that has been changed synchronously with [Enhanced Security Mode], a confirmation dialog box appears, and the Enhanced Security Mode may be canceled.
A setting that has been forcibly changed when the [Enhanced Security Mode] was enabled will not be changed if you disable the [Enhanced Security Mode].
Once the password rules have been enabled, an item for which a password that do not comply with the rules has been configured will result in authentication failure.
Enables you to check the used space, total space and available space on the hard disk.
This machine temporarily stores image data on the hard disk or in the memory during scanning and printing. When the stored data are no longer needed, you can delete them by overwriting with certain data.
Settings | Description |
---|---|
[Yes]/[No] | Specify whether to automatically delete data stored on the hard disk or in the memory by overwriting. [No] is specified by default. |
[Overwrite Method] | Select the method for deleting data stored on the hard disk or memory by overwriting.
[Mode 1] is specified by default. |
[Encryption Priority]/[Overwrite Priority] | When setting [Overwrite HDD Data] with [HDD Encryption Setting] in combination, select the preferred option for deleting data stored on the hard disk.
When changing this setting, you need to formatting the hard disk after restarting this machine. Before you attempt to change the setting, be aware that data may be deleted. [Encryption Priority] is specified by default. |
When disposing of this machine or returning it to a leasing business, use this function to delete all data saved on the hard disk by overwriting. This function also resets all passwords to the factory settings.
Prior to performing this operation, contact your service representative.
To perform delete by overwriting, select [HDD Overwrite Method] and tap [Delete].
[Mode 1]: Overwrites with 0x00.
[Mode 2]: Overwrites with single-byte random numbers - overwrites with single-byte random numbers - overwrites with 0x00.
[Mode 3]: Overwrites with 0x00 - Overwrites with 0xff - Overwrites with single-byte random numbers - Verifies.
[Mode 4]: Overwrites with single-byte random numbers - Overwrites with 0x00 - Overwrites with 0xff.
[Mode 5]: Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0x00 - Overwrites with 0xff.
[Mode 6]: Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0x00 - Overwrites with 0xff - Overwrites with random numbers.
[Mode 7]: Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0xaa.
[Mode 8]: Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0xaa - Verifies.
[Mode 1] is specified by default.
Protects saved data by locking the hard disk using a password.
To encrypt the data on the hard disk, enter an encryption passphrase (in 20 characters, case sensitive).
Be sure to keep the password you have entered carefully so that you do not forget them. Should the password be lost, it takes a major recovery work to restore it.
If a password is already set, you can change or cancel it.
Formats the hard disk.
Retrieve any data needed from the hard disk beforehand.
Formatting the hard disk causes the following types of data to be deleted.
Program
Address Book
Authentication method setting
User authentication setting
Account track setting
User Box
User Box setting
Documents in User Boxes
Confidential User Box setting
Bulletin Board User Box setting
Encrypts all data saved on the hard disk for protection purposes.
To lock the hard disk with a password, enter a password to lock it (in 20 characters, case sensitive).
Be sure to keep the encryption passphrase you have entered carefully so that you do not forget them.
Select whether to force application of stamps to original data when printing and sending a fax. To apply a stamp, configure the type and print position.
Users are not allowed to manually change or cancel the settings for the stamp function. You can explicitly indicate the sender identification by adding the user name or company name. Also, you can use the copy security function to suppress unauthorized copy operation.
For both [Printing] and [Sending], [Do Not Apply] is specified by default.
Deletes stamps registered for Stamp, Copy Protect and Stamp Repeat.
Specify whether to enable the FIPS (Federal Information Processing Standardization) Mode.
FIPS defines security requirements for cryptographic modules. These standards are adopted by many organizations, including U.S. federal government agencies. Enabling the FIPS Mode makes the functions of the machine conform to the FIPS.
[Invalid] is specified by default.
Select whether to permit your service representative to change [Administrator Settings] of a device without authentication.
[Restrict] is specified by default.
Specify a restriction code to prevent an OpenAPI connection application from being registered on this machine.
For details, contact your service representative.