Configure the settings to obtain information of this machine or to monitor the machine using Simple Network Management Protocol (SNMP).
Settings | Description |
---|---|
[ON]/[OFF] | Select whether to use SNMP. [ON] is specified by default. |
[SNMP v1/v2c(IP)] | Select whether to use SNMP v1 or SNMP v2. [ON] is specified by default. |
[SNMP v3(IP)] | Select whether to use SNMP v3. [ON] is specified by default. |
[SNMP v1(IPX)] | Select whether to use SNMP v1 in the IPX environment. [ON] is specified by default. |
[UDP Port Number] | If necessary, change the UDP port number. Normally, you can use the original port number. [161] is specified by default. |
[SNMP v1/v2c Settings] | Tap [SNMP v1/v2c Settings] to configure SNMP v1 or v2c settings.
|
[SNMP v3 Settings] | Tap [SNMP v3 Settings] to configure SNMP v3 settings.
|
[TRAP Setting] | Select whether to allow a notification of the status of this machine using the SNMP TRAP function. [Allow] is specified by default. |
[TRAP Setting When Authentication Failed] | Select whether to send TRAP when authentication fails. [Invalid] is specified by default. |
Select whether to use the SSDP (Simple Service Discovery Protocol) or not. To use SSDP, change the multicast TTL as necessary.
Using SSDP allows that software on the network or other services search for services which can be supplied by this machine. It also notifies that services have been started on this machine.
This function is available when using services such as OpenAPI.
Settings | Description |
---|---|
[ON]/[OFF] | Select whether to use SSDP. [ON] is specified by default. |
[Multicast TTL Setting] | Change TTL (Time To Live) for SSDP multi-cast packet if necessary. [1] is specified by default. |
Configure the settings to obtain information of this machine or to monitor the machine using Simple Network Management Protocol (SNMP).
Settings | Description |
---|---|
[ON]/[OFF] | Select whether to use SNMP. [ON] is specified by default. |
[SNMP v1/v2c(IP)] | Select whether to use SNMP v1 or SNMP v2. [ON] is specified by default. |
[SNMP v3(IP)] | Select whether to use SNMP v3. [ON] is specified by default. |
[SNMP v1(IPX)] | Select whether to use SNMP v1 in the IPX environment. [ON] is specified by default. |
[UDP Port Number] | If necessary, change the UDP port number. Normally, you can use the original port number. [161] is specified by default. |
[SNMP v1/v2c Settings] | Tap [SNMP v1/v2c Settings] to configure SNMP v1 or v2c settings.
|
[SNMP v3 Settings] | Tap [SNMP v3 Settings] to configure SNMP v3 settings.
|
[TRAP Setting] | Select whether to allow a notification of the status of this machine using the SNMP TRAP function. [Allow] is specified by default. |
[TRAP Setting When Authentication Failed] | Select whether to send TRAP when authentication fails. [Invalid] is specified by default. |
Configure the TCP Socket operating environment.
To use application software that communicates with this machine via TCP Socket, configure the TCP Socket settings of this machine.
Settings | Description |
---|---|
[TCP Socket] | Configure settings to establish a communication with this machine via TCP Socket. For details, refer to Here. |
[TCP Socket (ASCII Mode)] | Configure settings to establish a communication with this machine via TCP Socket (ASCII Mode). Enabling TCP Socket (ASCII Mode) displays Web Connection in the flash view. For details, refer to Here. |
Configure settings to enable use of the FTP server function of this machine.
Using this machine as an FTP server allows you to associate this machine with an application that operates as an FTP client.
Settings | Description |
---|---|
[ON]/[OFF] | Select whether to use the FTP server function of this machine. [OFF] is specified by default. |
[Deny Reception Command] | Select a command to deny a receiving job from an FTP client when using the FTP server of this machine. Set this option to return an error when a PORT/EPRT command or PASV/EPSV command is sent from an FTP client to this machine. [Allow] is specified by default. |
[PORT Command Enhanced Security] | Select whether to enable the security of this machine against FTP bounce attacks. This option is not available if [Deny Reception Command] is set to [PORT/EPRT]. When a PORT/EPRT command is sent from an FTP client, the data connection is established only if both of the following conditions are satisfied:
[Enable] is specified by default. |
Configure settings to enable use of the WebDAV server function of this machine.
Using this machine as a WebDAV server allows you to associate this machine with an application that operates as a WebDAV client.
Settings | Description |
---|---|
[ON]/[OFF] | Select whether to use the WebDAV server function of this machine. [ON] is specified by default. |
[SSL Settings] | Specify whether to use the SSL for communication or not.
[Non-SSL Only] is specified by default. |
[Password Setting] | Specify the password to restrict access to the WebDAV server of this machine (using up to 64 characters). Tapping [Initial Password] returns the password to the default. [sysadm] is specified by default. |
Specify whether to remotely import or export user data such as address information using the remote diagnosis system.
Settings | Description |
---|---|
[Import/Export User Data] | Specify whether to allow importing/exporting of the destinations registered on this machine (one-touch destinations, groups, and programs), authentication information from the remote diagnosis system. [Restrict] is specified by default. |
To use the remote diagnosis system via a proxy server, register the proxy server currently used.
Settings | Description | |
---|---|---|
[ON]/[OFF] | Select whether to use a proxy server when using the remote diagnosis system. [OFF] is specified by default. | |
[WebDAV Client Settings and Synchronization] | Select this option to use the proxy server registered in [WebDAV Client Settings] as a proxy server for remote diagnosis. [WebDAV Client Settings and Synchronization] is specified by default. | |
[Individual Settings] | Select this option to register a proxy server for remote diagnosis separately from the proxy server registered in [WebDAV Client Settings]. | |
[Proxy Server Address] | Enter the proxy server address. Use one of the following formats.
| |
[Proxy Server Port Number] | If necessary, change the proxy server port number. Normally, you can use the original port number. [8080] is specified by default. | |
[User Name] | Enter the user name to log in to the proxy server (using up to 63 characters). | |
[Password] | Enter the password of the user name you entered into [User Name] (using up to 63 characters). |
Configure the settings to use the ThinPrint function.
ThinPrint is a function that realizes speedy printing by performing data compression or broadband control when sending a print job from ThinPrint Engine (.print Engine) to this machine used as ThinPrint Client (.print Client).
Settings | Description |
---|---|
[ON]/[OFF] | Select whether to use the ThinPrint function. Select [ON] to use this machine as ThinPrint Client (.print Client). [ON] is specified by default. |
[Port Number] | Enter the port number of ThinPrint Engine (.print Engine) to be connected. [4000] is specified by default. |
[Data Size before Compression] | Specify the maximum packet size to compress data in the ThinPrint Engine (.print Engine) side. ThinPrint Engine (.print Engine) compresses data in these sizes before sending a print job to this machine. [8192] is specified by default. |
[Connection Timeout] | Enter the connection timeout period to send a print job from ThinPrint Engine (.print Engine). [90] is specified by default. |
[Printer Name] | Enter the printer name of this machine to be used in ThinPrint Engine (.print Engine). |
[Printer Class Name] | Enter the printer class name of this machine to be used in ThinPrint Engine (.print Engine). |
[Certificate Verification Level Settings] | To verify the certificate, select items to be verified.
|
[Connection Service Setting] | Select whether to use Connection Service. [OFF] is specified by default. If [ON] is selected, configure the following settings.
|
[Checking Connection Service Setting] | Displays the status of the connection with Connection Service. |
An optional i-Option LK-111 is required to use the ThinPrint function.
Connect the machine to an Android/iOS tablet terminal, then configure a communication setting to transfer image data or operation contents of the Control Panel.
Settings | Description |
---|---|
[ON]/[OFF] | Select whether to allow a connection from a tablet terminal. [OFF] is specified by default. |
[Connection Method] | Compresses image data of the Control Panel of this machine before sending it to a tablet terminal. Select whether to give priority to the operation speed at a tablet terminal or give priority to the image quality of the tablet terminal screen. [Standard] is specified by default. |
[Connection Timeout] | If necessary, change the timeout period to close a communication with a tablet terminal. [20] minutes is specified by default. |
[Remote Operation Switch Confirmation] | Select whether to display the screen for checking whether to continue a remote operation on the screen of a tablet terminal when the Control Panel of this machine has been touched while a remote operation is being performed using a tablet terminal. [ON] is specified by default. |
Configure a setting to display network information of this machine, which is required to connect this machine to a mobile terminal, as a QR code on the screen of this machine.
Settings | Description | |
---|---|---|
[ON]/[OFF] | Select whether to display the QR code on the screen of this machine. [OFF] is specified by default. | |
[Wireless Connection Setting] | Select whether to specify a method to establish a wireless connection between a mobile terminal and this machine. The information specified in this option is applied to the QR code. [No] is specified by default. | |
[Individual Settings] | Specify a method to establish a wireless connection between a mobile terminal and this machine.
|