What Is [Staple Finisher(Punch) Adj.]?
Overview
Make various adjustments for Punch Unit PK-525 mounted on the finisher.
Arrange the finishing of printouts by adjusting the rotation amount of the registration roller or the punch hole position.
NOTICE
One of the following options is required to use this function.
- Finisher FS-532 with Punch Unit PK-525 mounted
- Finisher FS-541 with Punch Unit PK-525 mounted
Setting Items
Screen access
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Punch) Adj.]
Setting item | Description |
|---|---|
Adjust the amount of paper loop of the registration roller, and straighten the bends and wrinkles of the paper. | |
Adjust the distance between the edge of the punched output paper and the center of the punch holes, and arrange the finishing. | |
Adjust the distance between the center of the punched output paper and the center of the punch holes, and arrange the finishing. | |
Set conditions when the sensor detects mis-centering. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.