This page shows the print result image scanned by Intelligent Quality Care Unit IQ-501. This is displayed on the 3rd page of the PDF file for the completed job image report and the out of range image report.
Completed job image report: Report of printouts that satisfy the inspection level. This report enables you to confirm the printing result image that is judged to be in the allowable range.
Out of range image report: Report of printouts that did not satisfy the inspection level. This report enables you to confirm the printing result image that is judged to be out of range. Annotations are added to the PDF file at the detection points. In the annotation, the detection type, detection level, coordinates, and others are described. Also, [Bookmarks] displays the number of detections and page information.
The bookmark for the out of range image report shows the number of errors detected for the job and page information.
Item | Description |
---|---|
[Set(n)] | Number of the set in which an out of range image was detected. n: nth set |
[Page(n)] | Number of the page on which an out of range image was detected. n: nth page Click this to open the bookmark; the detected items are displayed as follows. |
[Stain Total] | Total number of detected stains. Up to 20 items are displayed. |
[Stain(XXX) Level(n)] | Displays the stain level (n). For details about the level, refer to Setting Procedure ([Automatic Inspection Level Setting]). XXX: Serial No. |
[Omission Total] | Total number of omissions. Up to 20 items are displayed. |
[Omission(XXX) Level(n)] | Displays the omission level (n). XXX: Serial No. |
[Spot Total(n)] | Displays the number (n) of detected spots. |
[Spot(XXX) Level(n)] | Displays the level (n) of the detected spot. XXX: Serial No. |
[StreakFD Total(n)] | Displays the number (n) of detected FD streaks. |
[StreakFD(XXX)] | Displays the detected FD streak. XXX: Serial No. |
[StreakCD Total(n)] | Displays the number (n) of detected CD streaks. |
[StreakCD(XXX)] | Displays the detected CD streak. XXX: Serial No. |
[Barcode Total(n)] | Displays the number (n) of bar code or QR code errors. |
[Blank(m)] | Displays the area in which the bar code or QR code was blank. m: Area No. |
[Decode Error(m)] | Displays the area in which bar code or QR code decoding failed. m: Area No. |
[1st/2nd Mismatch(m)] | Displays the area in which front/back mismatching of bar code or QR code occurred. m: Area No. |
[Sequential Check Mismatch(m)] | Displays the area in which a sequential error of a bar code or QR code occurred. m: Area No. |
[Serial No.Total(n)] | Displays the number (n) of number errors. |
[Blank(m)] | Displays the area in which the number was blank. m: Area No. |
[Decode Error(m)] | Displays the area in which number decoding failed. m: Area No. |
[1st/2nd Mismatch(m)] | Displays the area in which front/back mismatching of number occurred. m: Area No. |
[Sequential Check Mismatch(m)] | Displays the area in which a sequential error of a number occurred. m: Area No. |
[Alignment error] | Displayed when alignment with the reference image failed. |
[csv read error] | Displayed when report creation failed. |
RealTimeCollationError Total(n)* | Displays the number of real-time collation errors. n: Total number of errors |
RealTimeCollationError(m)* | Displays the link to the area that caused a real-time collation error. m: Number to specify the area |
*: Displayed when Variable Data Inspection Kit UK-312 is mounted.
The problem part is enclosed by a frame, and the detected content is displayed as an annotation as follows.
Item | Description |
---|---|
[Stain(XXX)] | Displays the detected stain. XXX: Serial No. |
[Omission(XXX)] | Displays the detected omission. XXX: Serial No. |
[Spot(XXX)] | Displays the detected spot. XXX: Serial No. |
[StreakFD(XXX)] | Displays the detected streak in the paper feed direction. XXX: Serial No. |
[StreakCD(XXX)] | Displays the detected streak in the crosswise direction. XXX: Serial No. |
[Blank(m)] | Displays the area in which the bar code, QR code, or number was blank. m: Area No. |
[Decode Error(m)] | Displays the area in which bar code, QR code, or number decoding failed. m: Area No. |
[1st/2nd Mismatch(m)] | Displays the area in which front/back mismatching occurred in bar code, QR code, or number. m: Area No. |
[Sequential Check Mismatch(m)] | Displays the area in which a sequential error of bar code, QR code, or number occurred. m: Area No. |
[Level(X)] | Displays the spoilage detection level. X: Level |
[x:XXX.XX] [y:XXX.XX] | Displays the stain position based on the upper left of the image. x: Lateral position, y: Vertical position XXX.XX: Coordinates |