Overview of Management
- Management of this Machine
Cleaning
- Cleaning the Original Glass
- Cleaning the ADF Guide Cover
- Cleaning the Exterior of the Machine
- Cleaning the Control Panel
- Cleaning the Duplex Part
- Cleaning Saddle Stitcher SD-506
  - Cleaning the conveyance belt
  - Disposing Trimmings
- Cleaning Saddle Stitcher SD-513
  - Cleaning the conveyance belt
  - Disposing Trimmings
- Cleaning the Folding Unit FD-503
  - Disposing Punch Waste
- Cleaning the Finisher FS-532
  - Disposing Punch Waste
- Cleaning the Perfect Binder PB-503
  - Disposing Trimmings
- Cleaning the Paper Feed Unit PF-707m or Paper Feed Unit PF-711
- Cleaning the Relay Unit RU-511
- Cleaning the Integrated Color Care Unit IQ-501
- Cleaning the Scrap Box of Multi Punch GP-501
Inspection
- PM Call
- Checking the Remaining Amount of Consumables
- Checking the Counter
  - About the counter
  - Counter screen and items
- Checking the Status Indicator Light
Replenishment and Replacement
- Replenishing paper
- Replenishing Toner Supply
- Replacing Waste Toner Box
- Replacing the Cyclone Box
- Replenishing Staple Supply
- Replenishing Glue Pellets
  - Replenishing Glue Pellets in Perfect Binder PB-503
- Replenishing Water Supply in Humidifier Tank
  - Replenishing water supply in the humidifier tank of Relay Unit RU-511
- Replacing Trim Receiver
  - Replacing trim receiver of Saddle Stitcher SD-506
- Replenishing Bind Parts to Auto Ring Binder GP-502
Auto Reset and Reset
- Restoring Arbitrary Settings Automatically (Auto Reset)
  - Overview of Auto Reset
  - Auto Reset setting
- Restoring Arbitrary Settings Manually (Reset)
Power Saving
- Overview of Power Saving
- Automatically Conserving Energy
- Manually Conserving Energy
- Limiting Machine Usage
- Canceling Energy Conservation Manually
- Using Energy-save Mode for Monochrome Printing
Maintenance Service
- Maintenance Services

Replenishing Glue Pellets in Perfect Binder PB-503

When Perfect Binder PB-503 is out of glue pellets, warm-up of the binder cannot be complete, resulting in the binding operation unavailable. In this case, the following message will appear in the message area of the screen.

Please open glue hopper cover of perfect binder, add glue pellet to glue hopper

The Perfect Binder Glue indicator in the Consumable and Scrap Indicators area of the MACHINE screen lights up red, and the text color changes to yellow.

If glue pellets run out during the binding operation performed by the Perfect Binder PB-503, the machine stops the job immediately and binding operation becomes suspended.

Replenish glue pellets to the Perfect Binder PB-503.

preconditionBe sure to use the Glue Chip GC-501 exclusively provided for Perfect Binder PB-503. Using any other glue may cause machine trouble.
preconditionDo not touch the lever in the glue hopper with your hand to avoid breakdown.
preconditionBe sure to loosen glue pellets inside the bag before supplying them. Clustered glue pellets may stick inside the glue hopper. If glue pellets stick inside the glue hopper, please contact your service representative.
preconditionDo not supply glue pellets above the limit level indicated inside the glue hopper.
preconditionBe sure to close the glue hopper cover firmly. Otherwise, an error message will be displayed.

Display the help message on the MACHINE screen, and then press Consumable/Scrap.
Press the Glue Pellet tab in the help message area.
Perform the process while using downup to follow the steps.

Reference

For details about the help message, refer to Displaying Help Message.

Menu

Machine Management

Replenishing Glue Pellets in Perfect Binder PB-503

Reference