Overview of Management
- Management of this Machine
Cleaning
- Cleaning the Original Glass
- Cleaning the ADF Guide Cover
- Cleaning the Exterior of the Machine
- Cleaning the Control Panel
- Cleaning the Duplex Part
- Cleaning Saddle Stitcher SD-506
  - Cleaning the conveyance belt
  - Disposing Trimmings
- Cleaning Saddle Stitcher SD-513
  - Cleaning the conveyance belt
  - Disposing Trimmings
- Cleaning the Folding Unit FD-503
  - Disposing Punch Waste
- Cleaning the Finisher FS-532
  - Disposing Punch Waste
- Cleaning the Perfect Binder PB-503
  - Disposing Trimmings
- Cleaning the Paper Feed Unit PF-707m or Paper Feed Unit PF-711
- Cleaning the Relay Unit RU-511
- Cleaning the Integrated Color Care Unit IQ-501
- Cleaning the Scrap Box of Multi Punch GP-501
Inspection
- PM Call
- Checking the Remaining Amount of Consumables
- Checking the Counter
  - About the counter
  - Counter screen and items
- Checking the Status Indicator Light
Replenishment and Replacement
- Replenishing paper
- Replenishing Toner Supply
- Replacing Waste Toner Box
- Replacing the Cyclone Box
- Replenishing Staple Supply
- Replenishing Glue Pellets
  - Replenishing Glue Pellets in Perfect Binder PB-503
- Replenishing Water Supply in Humidifier Tank
  - Replenishing water supply in the humidifier tank of Relay Unit RU-511
- Replacing Trim Receiver
  - Replacing trim receiver of Saddle Stitcher SD-506
- Replenishing Bind Parts to Auto Ring Binder GP-502
Auto Reset and Reset
- Restoring Arbitrary Settings Automatically (Auto Reset)
  - Overview of Auto Reset
  - Auto Reset setting
- Restoring Arbitrary Settings Manually (Reset)
Power Saving
- Overview of Power Saving
- Automatically Conserving Energy
- Manually Conserving Energy
- Limiting Machine Usage
- Canceling Energy Conservation Manually
- Using Energy-save Mode for Monochrome Printing
Maintenance Service
- Maintenance Services

ErP Setting

About ErP Setting function
Changing ErP Setting

About ErP Setting function

The ErP Setting function is a function that turns the main power switch OFF when the main power switch is ON and the machine remains in the following conditions for a certain period of time.

- The sub power switch is OFF.

- Auto Shut OFF is activated.

- Auto Low Power is activated.

Changing ErP Setting

On the UTILITY screen, you can set the ErP Setting function to OFF and change the set period of time (Do Not Switch (OFF), 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, 72 Hours). For details, refer to [ErP Setting].

Tips

ErP Setting is grayed out to show that it is not available on a machine with the Weekly Timer ON/OFF Setting set to Weekly Timer ON.

Menu

Machine Management

ErP Setting

About ErP Setting function

Changing ErP Setting

Tips