Press [Paper Setting] on the [MACHINE] screen.

Select [Bypass] on the [Paper Setting] screen, and press [Change Set].

Set the [Paper Type].

• If coated paper cannot be selected, set [Weight] to 81 g/m² / 22 lb Bond or higher to select it.

• The weight of coated paper that can be fed for banner printing is 128 g/m² to 300 g/m² / 34 lb Bond to 81 lb Bond.

Press [Paper Size].

Select [Custom] and set the paper size ((Width) 330.2 mm e (Length) 1,200.0 mm / (Width) 13.0" e (Length) 47.24" is used here).

• Select [(1)] (cross direction) or [(2)] (feed direction), and enter the values using the on-screen keypad or with the Keypad on the Control panel.

• You can also change the values using [+] and [,].

Set the [Weight].

• Banner paper weight: 128 g/m² to 300 g/m² / 34 lb Bond to 81 lb Bond

Configure other items as necessary, and press [OK].

Press [Close] to return to the [MACHINE] screen.

Open the original in the application, and click [Print] in the [File] menu.

Select the printer to use for printing, and click [Properties].

Select the [Layout] tab, and configure the items.

• For details about the settings, refer to the [Layout] tab settings (described after the procedure).

Select the [Finishing] tab, and add a check mark to [Face Up] in [Output Order].

Select the [Paper] tab, and click [Acquire Tray and Paper Data].

• "" is displayed if tray / paper information is successfully obtained.

• "" is displayed if you were unable to acquire tray / paper information. Check to see if parts such as the optional paper feed tray are mounted properly.

Select [Bypass Tray] for [Paper Tray], and click [OK].

Enter the [Copies] you want to print on the [Print] screen, and click [Print].