1

Reverse Automatic Document Feeder DF-713 (ADF) (optional)

A multi-page original can be fed and scanned one sheet at a time.
Even both the front and back sides of 2-sided original are scanned in one feed, without inverting it.

* AccurioPress C4080 / AccurioPress C4070 / AccurioPrint C4065 only.

2

Sub power switch

Turns the machine power ON/OFF.

3

USB port (USB 2.0 Type A e 3)

Used when connecting external memory media (USB flash drive, USB-HDD), keyboard, mouse, Authentication Unit AU-201S, Intelligent Media Sensor IM-101, etc.

USB port (USB 2.0 Type A e 3) supports low power devices only. Please provide an external supply of power for devices that require a large amount of power.

4

Touch panel

Displays the screens such as the [MACHINE] screen, and set up operations. Also, displays the operation method and method for handing problems.

5

Control panel

Press when operating and setting up.

6

Toner supply door

Open when replacing Toner bottle.

7

Toner supply door handle

Used when opening Toner supply door.

8

Tray 1

Stores 500 sheets (80 g/m² / 21 lb Bond).

9

Tray 2

Stores 1,000 sheets (80 g/m² / 21 lb Bond).

10

Main body front door handle

Used when opening Front door.

11

Front door

Open when clearing a paper jam or when turning Main power switch ON/OFF.

12

Original Cover OC-511 (Original cover) (optional)

Open when loading documents in Original glass.

* AccurioPress C4080 / AccurioPress C4070 / AccurioPrint C4065 only.

13

Working Table WT-511 (optional)

Documents, etc. can be placed here temporarily.

14

Multi Bypass Tray MB-509 (optional)

Used when printing on paper that is not loaded in the Main body tray. Stores 250 sheets (80 g/m² / 21 lb Bond).

15

Right side door

When clearing a paper jam, open the door and remove the paper.

16

Waste toner box replacement door

Open when replacing Waste toner box.

17

Output Tray OT-511 (optional)

Ejects the output paper without Offset.

18

Power cord

Supplies power to machine.

19

Serial port (RS-232C)

Port for customer engineer (CE) only.

20

Network port (10Base-T, 100Base-TX, 1000Base-T)

Connects an Ethernet cable to operate the system and uses as a network scanner.

21

USB port (USB3.0/2.0 TypeA e 1)

Used when connecting external memory media (USB flash drive, USB-HDD), keyboard, mouse, Authentication Unit AU-201S, Intelligent Media Sensor IM-101, etc.

USB port (USB 3.0/2.0 TypeA e 1) supports low power devices only. Please provide an external supply of power for devices that require a large amount of power.

22

Image Controller connection port

Used when mounting all the Image Controller.

23

Video Interface Kit connection port

Used when mounting Image Controller or Video Interface Kit VI-515 (option).

* Video Interface Kit VI-515 (optional) is required to connect the Image Controller manufactured by EFI and the machine using a cable.

24

Dust proof filter

Prevents dust infiltration with the Dust proof filter that is attached to the internal cooling fan.

25

Image Controller IC-609 / Image Controller IC-607 (options)

This system can be used as a printing system.

26

Machine Connection Port

Connect to the machine.

27

USB port (USB3.0/2.0 TypeA e 1)

Used when connecting external memory media (USB flash drive, USB-HDD) and others.

28

Network port (10Base-T, 100Base-TX, 1000Base-T)

Connects an Ethernet cable to operate the Image Controller, and uses as a network printer.

29

USB port (USB 2.0 Type B e 1)

Connects machine to computer using a USB cable and uses as a local printer (only when Local Interface Kit EK-612 is mounted).

30

Power switch

Turns the Image Controller power ON/OFF.

31

Lock release lever

When clearing a paper jam, push the lever to the back, open the guide downward, then remove the paper.

Access Lock release lever from within the options on the left.