Function | Option | Description | |
---|---|---|---|
[Binding Position] | [Left Bind], [Right Bind], [Top Bind] | Set this to specify the binding position. | |
[Staple] | [Off], [Corner], [2 Positions (Wide)], [2 Positions (Narrow)], [2 Positions (Narrow+)] | Set this to specify stapling. From the drop-down list, specify the number of staples and the stapling position. | |
[Divide Output] | Off, On | Set this to output a job with it divided. | |
[Pages per Section] | Specify a unit when dividing a job . (1 to 9999) | ||
[Punch] | [Off], [2-Hole], [3-Hole], [4-Hole], [Multi Punch] | Set this to specify hole punching. From the drop-down list, specify the number of punches and the punching position. | |
[Ring Binding] | [Off], [On] | Set this to bind the printed paper using ring-shaped binder. | |
[Printed Side for Top Sheet] | [Outside], [Inside] | Specify the printed side of the top sheet when the [Ring Binding] is set. [Inside]: Prints document on inside of the top sheet. [Outside]: Prints document on outside of the top sheet. | |
[Printed Side for Last Sheet] | [Inside], [Outside] | Specify the printed side of the last sheet when the [Ring Binding] is set. [Inside]: Prints document on inside of the last sheet. [Outside]: Prints document on outside of the last sheet. | |
[Fold] | [Off], [Half-Fold], [Z-Fold], [Tri-Fold-In], [Tri-Fold-Out], [Double Parallel-Fold], [Gate-Fold], [Multi Tri-Fold], [Multi Half-Fold] | Set the fold function. From the drop-down list, select the folding condition. | |
[Folding Direction] | [Inside], [Outside] | Select whether to set the folding direction to Inside or Outside. | |
[Multi Half-Fold Details] | [Fold and Staple] | [Off], [2 Positions], [4 Positions] | Specify the number of staple positions when [Fold and Staple] is specified. |
[Trim] | Off, On | Trims and aligns edges of the paper folded in half when [Multi Half-Fold] ([Fold and Staple]) is selected. | |
[Output Tray] | [Default], [Stacker Auto], [Stacker 1/2 Main Tray/Sub Tray], [Multi Folder Main Tray], [Multi Folder Sub Tray], [Saddle-Stitcher Sub Tray], [Stapler Main Tray], [Stapler Sub Tray], [Perfect Binder Sub Tray], [External Finisher], [Open Stacker Main Tray] | Select the tray to output the printed pages. Selectable items vary depending on the mounted optional device. | |
[Feed Direction] | [Auto], [Long Edge], [Short Edge] | Set a direction to feed paper. | |
[Output Order] | [Face Up] | Select [Face Up] to output printed paper with its face up. | |
[N to 1] | If you want to print an original in a reverse order, select [N to 1]. | ||
[Copies] | 1 to 9999 | Specify the number of copies. | |
[Sort/Group] | [Sort], [Group] | Set this to collate pages sequentially when printing multiple sets of copies. | |
[Offset Output Copies] | Off, On (1 to 9999) | Stagger after each set of copies specified. (For details, refer to the table below) | |
[Offset Output Sheets] | Off, On (1 to 65535) | Stagger after the number of pages specified. (For details, refer to the table below) | |
[Pile Permission] | Off, On | When turned on, other jobs can be printed and are permitted to pile up on the large capacity stacker. | |
[External Finisher] | Off, On | Select whether to apply External Finisher. |
The [Staple] function is available only when an optional stapler is mounted. You can select the width between 2 Positions only when a stapler (Finisher FS-532) is mounted.
The widths between 2 Positions that can be set are as follows.
Wide...Approx. 165 mm / 6.50"
Narrow...Approx. 140 mm / 5.51"
Narrow+...Approx. 120 mm / 4.72"
The [Punch] function is available only when an optional Punch Kit or Multi Hole Punch Unit is mounted.
The [Ring Binding] function is available only when an optional Ring Binder is installed.
The [Fold] function is available only when the optional Multi Folder or Stapler, and the Saddle Kit are mounted. Also, the setting items move to the [Fold] tab when [Saddle-Stitcher 2] (Saddle Stitcher SD-513) and [Crease Unit] (Creaser Unit CR-101), or [Spine Corner Forming Unit] (Folding Unit FD-504) or [2-Side Slitting Unit] (Trimmer Unit TU-503) are mounted.
Example of offset:
A | B | C | |
---|---|---|---|
Output Copies | 1 | 1 | 3 |
Offset Output Copies | 2 | 1 | 2 |
Offset Output Sheets | ― * | 2 | ― * |
Sort/Group | Sort | Sort | Sort |
D | E | F | |
---|---|---|---|
Output Copies | 2 | 4 | 4 |
Offset Output Copies | 1 | 3 | 3 |
Offset Output Sheets | 2 | ― * | ― * |
Sort/Group | Sort | Sort | Group |
*: Values are unacceptable