Wireless LAN Adapter

[Easy Setting (WPS)]

Configure a setting to automatically obtain connection information from an access point.

The access point must support the WPS function.

• [Push Button Method]: Select [Push Button Method], and tap [Start Operation] to try a connection with an access point.
  If you press the WPS setting button at the access point, settings such as SSID and security required for a connection are configured automatically.

• [PIN Method]: Select [PIN Method], and tap [Start Operation] to display the PIN code.
  If you enter the displayed PIN code at the access point, settings such as SSID and security required for a connection are configured automatically.
  This function requires a computer that contains Windows 7 or later as the operating system.

[Manual Setting]

Manually configure settings items such as SSID and the encryption scheme that are required for a connection.

• [SSID]: Enter the SSID of the wireless LAN access point connected to the machine (using up to 32 characters).

• [40 to 20 MHz Auto Switch]: Select [ON] to try a high-speed communication with 40MHz. [OFF] is specified by default.

• [Authentication/Encryption Algorithm]: Select the algorithm used for authentication or encryption.
  If [WEP] is selected, specify [Key Input Method] and [WEP Key]. To specify multiple WEP keys, select the required WEP keys in [Use key settings].
  If an algorithm other than WEP is selected, specify [Key Input Method] and [Passphrase].

[Connection Status]

Allows you to check the access point connected to this machine, the radio field intensity of the access point, and the current communication speed.