Troubleshooting
Combination of Implementation Timing and Adjustment Items
This section describes how to solve problems when the image quality is poor even after performing the "Adjusting Standards".
The operation items may differ depending on the options mounted on the system.
Tips
After performing the "Recommended Settings", it is recommended that you make adjustments according to the content of the trouble. For details, refer to the following.
Recommended Settings (With Intelligent Quality Care Unit IQ-501 Mounted)
1
Set [Synchronize with Image Diagnosis (AQA)] to [ON] with [Package Color Auto Adj.]. You can collectively adjust the items related to the image stability.
With [Synchronize with Image Diagnosis (AQA)], you can select the items for adjustment to be performed automatically after performing [Image Diagnosis].
For details about [Image Diagnosis], refer to [Image Diagnosis].
For the adjustment, use the paper used when registering the target density.
2
If the poor image quality does not improve even after performing Section 1 of "Recommended Settings", perform Exact Color Calibration.
Calibration should be performed on the paper used for the job.
Recommended Settings (With Intelligent Quality Care Unit IQ-501 Unmounted and Relay Unit RU-518m Mounted)
1
Perform the adjustments detailed below.
2
If the poor image quality does not improve even after performing Section 1 of "Recommended Settings", perform Exact Color Calibration.
Calibration should be performed on the paper used for the job.
in the upper-right of a page, it turns into 
and is registered as a bookmark.