Home>Scan>Operations required to use this function (for the administrator)

Scan

Operations required to use this function (for the administrator)

Checking a LAN cable for connection

Check that a LAN cable is connected to the LAN port of this machine via the network.

Checking the network settings

Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that an IP address is displayed.

  • If no IP address is displayed, you need to set up the network. For details, refer to Here.

Enabling the Address Link function

On this machine, permit a connection from an Android terminal using Remote Access, and enable the Address Link function.

How to configure the setting is explained using Web Connection. For details, refer to Here.

Configuring a setting to associate this machine with an Android terminal

It is advisable to use the NFC function of this machine when connecting an Android terminal to this machine using Remote Access. Using the NFC function of this machine allows you to easily connect an Android terminal to this machine using Remote Access by simply placing the Android terminal on the mobile touch area on the Control Panel of this machine.

Configure a setting to support NFC on this machine. Also, for this machine, set network information required to connect an Android terminal to this machine.

How to configure the setting is explained using Web Connection. For details, refer to Here.