Operations required to use this function (for the administrator)
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this machine via the network.
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that an IP address is displayed.
If no IP address is displayed, you need to set up the network. For details, refer to Here.
Enabling the Panel Link Scan function
On this machine, permit a connection from an Android terminal using Remote Access, and enable the Panel Link Scan function.
How to configure the setting is explained using Web Connection. For details, refer to Here.
Configuring a setting to associate this machine with an Android terminal
It is advisable to use the NFC function of this machine when connecting an Android terminal to this machine using Remote Access. Using the NFC function of this machine allows you to easily connect an Android terminal to this machine using Remote Access by simply placing the Android terminal on the mobile touch area on the Control Panel of this machine.
Configure a setting to support NFC on this machine. Also, for this machine, set network information required to connect an Android terminal to this machine.
How to configure the setting is explained using Web Connection. For details, refer to Here.
Placing the shortcut key of the Panel Link Scan function on the main menu
Place the shortcut key to the Panel Link Scan screen on the main menu.
For details on how to place a shortcut key on the main menu, refer to Here.