Introduction | Loading the Original into the ADF

Loading the Original into the ADF

For Reverse Automatic Document Feeder DF-632

Item		Specifications
Original types	1-Sided	Thin paper (35 g/m² to 49 g/m² (9-5/16 lb to 13-1/16 lb)) Plain paper (50 g/m² to 163 g/m² (13-5/16 lb to 43-3/8 lb)) ^*
	2-Sided	Plain paper (50 g/m² to 163 g/m² (13-5/16 lb to 43-3/8 lb)) ^*
	Mixed original	Plain paper (50 g/m² to 128 g/m² (13-5/16 lb to 34-1/16 lb))
Original size		1-Sided/2-Sided Originals: A3 w to A6 w, Postcard (100 mm e 148 mm) w, 11 e 17 w to 5-1/2 e 8-1/2 v Fax mode: 139.7 mm to 1000 mm (5-1/2 inches to 39-3/8 inches)
Original loading capacity		1-Sided/2-Sided Originals: Max. 100 sheets (80 g/m² (21-1/4 lb))

For Reverse Automatic Document Feeder DF-714

Item		Specifications
Original types	1-Sided	Thin paper (35 g/m² to 49 g/m² (9-5/16 lb to 13-1/16 lb)) Plain paper (50 g/m² to 163 g/m² (13-5/16 lb to 43-3/8 lb)) ^*
	2-Sided	Plain paper (50 g/m² to 163 g/m² (13-5/16 lb to 43-3/8 lb)) ^*
	Mixed original	Plain paper (50 g/m² to 128 g/m² (13-5/16 lb to 34-1/16 lb))
Original size		1-Sided/2-Sided Originals: A3 w to A6 w, Postcard (100 mm e 148 mm) w, 11 e 17 w to 5-1/2 e 8-1/2 v Fax mode: 139.7 mm to 1000 mm (5-1/2 inches to 39-3/8 inches)
Original loading capacity		1-Sided/2-Sided Originals: Max. 100 sheets (80 g/m² (21-1/4 lb))

^* A6, B6 w, Postcards: 80 g/m² to 128 g/m² (21-1/4 lb to 34-1/16 lb)

Do not load the following originals into the ADF. Doing so may cause an original paper jam, or damage the originals.

Wrinkled, folded, curled, or torn originals
Highly translucent or transparent originals, such as transparencies or diazo photosensitive paper
Coated originals such as carbon-backed paper
Original that weighs less than 35 g/m² (9-5/16 lb), or more than 163 g/m² (43-3/8 lb)
Originals that are bound, for example, with staples or paper clips
Originals that are bound in booklet form
Originals with pages bound together with glue
Originals with pages that have had cutouts removed or are cutouts
Label sheets
Offset printing masters
Loose leaf loaded in the v direction

The ADF feeds original sheets one by one in order from the top, and automatically loads them. It also loads a 2-sided original automatically.

The ADF is helpful when loading a large number of original.

Widen the Lateral Guide.

Put the first page of an original at the top, and load the original into the Original Tray with the required side facing upward.

Load the original so that its top side is placed at the back. When loading in a different orientation, be sure to specify the loading direction of originals. For details on the loading direction of originals, refer to Specifying the original loading direction ([Original Direction]).

NOTICE

Do not load more than 100 sheets (80 g/m² (21-1/4 lb)) at a time into the Original Tray of the ADF, and do not load the sheets up to the point where the top of the stack is higher than the mark. Doing so may cause an original paper jam, original damage, or ADF failure. However, if the original contains more than 100 sheets (80 g/m² (21-1/4 lb)), it can be scanned separately.

Slide the Lateral Guide to fit the loaded original.