HomeSearch by PurposeConfiguring Reset Operations (for the administrator)

Search by Purpose

Configuring Reset Operations (for the administrator)

To change the time required to reset the system and the mode to be displayed after resetting ([System auto reset])

To display:
  • [Utility]
    • [Administrator]
      • [System Settings]
        • [Reset Settings]
          • [System auto reset]

Select whether to reset all settings (except registered settings) when this machine has not been operated for a certain period of time.

Setting

Description

[System auto reset function]

When using the system auto reset function, set this option to ON (default: ON).

[System Auto Reset Time]

Specify the time required to reset (default: [1] minute, available range: [1] to [9] minutes).

[Screen to display after startup/Reset]

Select a screen that is to be displayed preferentially after resetting (default: [Main Menu]).

This setting is only applied to the classic style screens.

[Screen Saver Function]

When using the screen saver function, set this option to ON (default: ON).

This option is displayed when the MarketPlace application is installed.

  • Log out of the Administrator Setting or User Auth/Account Track mode according to the time setting for [System Auto Reset Time] when user authentication/account track is active or the [Enhanced Security Mode] is enabled. When [System auto reset function] is set to OFF, you are logged out in 1 minute.

To change the time required to reset the currently updated settings ([Auto Reset])

To display:
  • [Utility]
    • [Administrator]
      • [System Settings]
        • [Reset Settings]
          • [Auto Reset]

When resetting all the settings (except registered settings) when no operation is performed on each screen of Copy, Scan/Fax, Fax, User Box, and Web browser functions for the specified time, set this option to ON (default: ON). Also, specify the time required to reset (default: [1] minute).

To reset condition settings when changing users or loading an original into the ADF ([Job Reset])

To display:
  • [Utility]
    • [Administrator]
      • [System Settings]
        • [Reset Settings]
          • [Job Reset]

Select whether to reset settings for the conditions that are applied when changing users or loading a document into the ADF.

Setting

Description

[Default Basic/Enlarge Display Common Setting]

When simultaneously specifying the default values of the normal screen display and enlarged display, set this option to ON (default: OFF).

If ON is selected, [Default Enlarge Display Settings] is not displayed. Initial values for each mode that are changed in [Default Copy Settings] or [Default Scan/Fax Settings] are applied to both Normal and Enlarge Display modes.

[UserChange]

To initialize all settings (except registered settings) when the key counter or management card is removed, set this option to ON (default: ON).

[When original is set on ADF]

To reset all settings (except registered settings) when document is loaded into the ADF, set this option to ON (default: OFF).

[Next Job]

Select whether to reset Staple Setting, Original Set/Bind Direction settings, and TX Settings for each job.

  • [Staple Setting]: When resetting after the staple job was completed, set this option to ON (default: OFF).

  • [Original Set/Bind Direction]: When resetting after the original loading or bind direction job was completed, set this option to ON (default: OFF).

  • [Reset Data After Job]: Select whether to clear all settings or only destinations when resetting for each job in Scan/Fax TX Settings (default: [Reset All]). If you select [Confirm with User], a confirmation screen appears to check with you if settings or destinations are to be cleared.