Fully Using Fax Functions

[Default Tab]

Select the default display of the main screen in the scan/fax mode (default: [Address Book]).

[Program Default]

Select a page to be displayed in the main screen of [Program] (default: [PAGE1]).

This setting is only applied to the classic style screens.

[Address Book Default Index]

Select the index and destination type that are initially shown when [Address Book] is displayed.

• [Index]: Select the index search text that has been selected when the destination was registered (default: [Main]).

• [Address Type]: Select a destination type to be displayed such as E-mail, fax and User Box (default: [All]).

[Default Address Sort Method]

Select the list order of destinations to be displayed in [Address Book] between an order by registration number and by registration name (default: [Name]).

If you select the registration name, destinations are sorted according to [Name] specified for the destinations.

This setting is only applied to the classic style screens.

[Default Address Display Method] (Classic style)

Select whether to set the default display of the [Address Book] of classic style to the button view or list view (default: [One-Touch Button Layout]).

[Default Address Display Method] (Basic style)

Select whether to set the default display of the list of registered destinations of basic style to the button view or list view (default: [One-Touch Button Layout]).

[Address Button Size Setting]

Select the size of a button to display [Address Book] with (default: [Standard]).

This setting is only applied to the classic style screens.

[Default Tab]

Select the default display of the main screen in the fax mode (default: [Address Book]).

[Program Default]

Select a page to be displayed in the main screen of [Program] (default: [PAGE1]).

This setting is only applied to the classic style screens.

[Address Book Default Index]

Select the index and destination type that are initially shown when [Address Book] is displayed.

• [Index]: Select the index search text that has been selected when the destination was registered (default: [Main]).

• [Address Type]: Select a destination type to be displayed such as E-mail, fax and User Box (default: [All]).

[Default Address Sort Method]

Select the list order of destinations to be displayed in [Address Book] between an order by registration number and by registration name (default: [Name]).

If you select the registration name, destinations are sorted according to [Name] specified for the destinations.

This setting is only applied to the classic style screens.

[Default Address Display Method] (Classic style)

Select whether to set the default display of the [Address Book] of classic style to the button view or list view (default: [One-Touch Button Layout]).

[Default Address Display Method] (Basic style)

Select whether to set the default display of the list of registered destinations of basic style to the button view or list view (default: [One-Touch Button Layout]).

[Address Button Size Setting]

Select the size of a button to display [Address Book] with (default: [Standard]).

This setting is only applied to the classic style screens.

[Copy Screen]

Configure settings for the screen displayed in copy operations.

• [Copy Operating Screen]: When displaying the screen indicating that printing is in process, set this option to ON (default: OFF). You can check the detailed copy settings and the job progress status with the screen that appears while printing. In addition, you can reserve the next job by tapping [Next Box Job], [Next Fax/Scan Job], or [Next Copy Job].

[FAX Active Screen]

Select whether to display the screen indicating the machine status during fax transmission.

• [TX Display]: When displaying the screen indicating that fax transmission is in process, set this option to ON (default: OFF). You can check information on a destination and document in this screen.

• [RX Display]: When displaying the screen indicating that fax receiving is in process, set this option to ON (default: OFF). You can check information on sender and fax being received in this screen.

[Animation Settings]

Select whether to display in animation view when opening or closing a pop-up window.

• [When Pop-up Opens]: When displaying an animation view to open the pop-up window, set this option to ON (default: OFF).

• [When Pop-up Closes]: When displaying an animation view to close the pop-up window, set this option to ON (default: OFF).

[Accessibility Settings]

Configure settings concerning panel operations of this machine.

• [Zoom Display Setting]: When pinching out (enlarging) the entire panel screen of this machine, set this option to ON (default: OFF). When enlarging, you can drag to move the display area while maintaining the zoom ratio.

[Paper jam release procedure display settings]

When displaying the paper jam clear procedure when a paper jam occurs, set this option to ON (default: ON).

[Uppercase and Lowercase Letters]

When distinguishing between upper and lower case alphabet characters to search for a registered destination, set this option to ON (default: ON).

[Search Option Screen]

When specifying whether to distinguish between upper and lower case alphabet characters to search for a destination, set this option to ON (default: OFF).

[Search Item Settings]

When displaying the keys for searching for [Application], [Copy Function], [Scan/Fax Function], and [Fax Function] on the screen, set this option to ON (default: ON).

Setting to ON allows you to specify the search range. Select whether to include [Application], [Copy Function], [Scan/Fax Function], and [Fax Function] in the search range.

[JPEG Compression Method key]

Select the default compression method to send data in color (default: [Standard]).

Data size is the largest in [High Quality] and the lowest in [High Compression].

[Black Compression Level]

Select the default compression method from [MH] and [MMR] for transmission in black-and-white (default: [MMR]).

[MH] provides the data size larger than [MMR]. If you cannot open the file saved in [MMR], save data in [MH].

[Compact PDF compression method]

Select the compression method for saving data in the compact PDF format (default: [Standard]).

Data size is the largest in [High Quality] and the lowest in [High Compression].

[Default Scan/Fax Settings]

Change the default settings (settings when the power is turned on, or the Reset key is used) in the scan/fax mode (default: [Factory Default]).

You can change the setting by selecting [Current Setting] after the option settings in scan/fax mode are changed.

[Default Enlarge Display Settings]

When Enlarge Display is selected, change the default settings (settings when the power is turned on, or the Reset key is used) in the scan/fax mode (default: [Factory Default]).

You can change the setting by selecting [Current Setting] after the option settings in scan/fax mode are changed.

[Color TIFF Type]

Select the default compression method for saving original data in the TIFF format (default: [TIFF(TTN2)]).

If you cannot open the file saved in [TIFF(TTN2)], save data in [TIFF(modified TAG)].

[Auto Rename Function]

When automatically adding a text to a file name, set this option to ON (default: OFF).

This function avoids file names from being duplicated in the destination when the file name is specified by the user.

[Distributed Scan PDF Settings]

Select [PDF] or [Compact PDF] as the file format to send a file to the scan server (default: [Compact PDF]).

This function is applied when PDF is set to the scan process as the file format.

[Distributed Scan XPS Settings]

Select [XPS] or [Compact XPS] as the file type to send a file to the scan server (default: [XPS]).

This function is applied when XPS is set to the scan process as the file format.

[JPEG Compression Method key]

Select the default compression method to send data in color (default: [Standard]).

Data size is the largest in [High Quality] and the lowest in [High Compression].

[Black Compression Level]

Select the default compression method from [MH] and [MMR] for transmission in black-and-white (default: [MMR]).

[MH] provides the data size larger than [MMR]. If you cannot open the file saved in [MMR], save data in [MH].

[Compact PDF compression method]

Select the compression method for saving data in the compact PDF format (default: [Standard]).

Data size is the largest in [High Quality] and the lowest in [High Compression].

[Default Scan/Fax Settings]

Change the default settings (settings when the power is turned on, or the Reset key is used) in the scan/fax mode (default: [Factory Default]).

You can change the setting by selecting [Current Setting] after the option settings in scan/fax mode are changed.

[Default Enlarge Display Settings]

When Enlarge Display is selected, change the default settings (settings when the power is turned on, or the Reset key is used) in the scan/fax mode (default: [Factory Default]).

You can change the setting by selecting [Current Setting] after the option settings in scan/fax mode are changed.

[Color TIFF Type]

Select the default compression method for saving original data in the TIFF format (default: [TIFF(TTN2)]).

If you cannot open the file saved in [TIFF(TTN2)], save data in [TIFF(modified TAG)].

[Auto Rename Function]

When automatically adding a text to a file name, set this option to ON (default: OFF).

This function avoids file names from being duplicated in the destination when the file name is specified by the user.

[Distributed Scan PDF Settings]

Select [PDF] or [Compact PDF] as the file format to send a file to the scan server (default: [Compact PDF]).

This function is applied when PDF is set to the scan process as the file format.

[Distributed Scan XPS Settings]

Select [XPS] or [Compact XPS] as the file type to send a file to the scan server (default: [XPS]).

This function is applied when XPS is set to the scan process as the file format.

[User Box Number]

Registration number of the User Box. Select [Use opening number] to automatically assign the smallest available number. When specifying a number, select [Input directly], and enter a value between 1 and 999999999.

[User Box Name]

Enter the User Box name (using up to 20 characters).

[Assign User Box Password]

To restrict usage of the User Box with the password, set this setting on.

• [User Box Password]: Enter the User Box password (using up to 64 characters, excluding double quotation marks ").

[Type]

When user authentication or account track is enabled, select the User Box type. If [Personal] is selected, specify the owner user. If [Group] is selected, specify the owner account.

[Auto Delete Document]

Specify the period from the date/time when a file was saved in a User Box; the date/time when a file was last printed; or the date/time when a file was sent from a User Box, to the date/time when a file is to be deleted automatically.

• [Do Not Delete]: Keeps the file in the User Box.

• [Specify days]: Select the number of days until the file is automatically deleted.

• [Specify Time]: Enter the time period before the file is automatically deleted.

[User Box Number]

Registration number of the User Box. Select [Use opening number] to automatically assign the smallest available number. When specifying a number, select [Input directly], and enter a value between 1 and 999999999.

[User Box Name]

Enter the User Box name (using up to 20 characters).

[Relay Destination]

Select [Search from List], and select a group destination in which fax destinations are registered.

Fax addresses must be included in the group destination to be registered as a relay destination.

[Relay TX Password]

Enter the relay password (using up to eight characters, including symbols # and *).

The entered password is required when you issue a relay request to this machine. Inform the sender of the password you entered here.

[User Box Number]

Registration number of the User Box. Select [Use opening number] to automatically assign the smallest available number. When specifying a number, select [Input directly], and enter a value between 1 and 999999999.

[User Box Name]

Enter the User Box name (using up to 20 characters).

[Assign User Box Password]

To restrict usage of the User Box with the password, set this setting on.

• [User Box Password]: Enter the User Box password (using up to 64 characters, excluding double quotation marks ").

[Type]

When user authentication or account track is enabled, select the User Box type. If [Personal] is selected, specify the owner user. If [Group] is selected, specify the owner account.

[Auto Delete Document]

Specify the period from the date/time when a file was saved in a User Box; the date/time when a file was last printed; or the date/time when a file was sent from a User Box, to the date/time when a file is to be deleted automatically.

• [Do Not Delete]: Keeps the file in the User Box.

• [Specify days]: Select the number of days until the file is automatically deleted.

• [Specify Time]: Enter the time period before the file is automatically deleted.

[User Box Number]

Registration number of the User Box. Select [Use opening number] to automatically assign the smallest available number. When specifying a number, select [Input directly], and enter a value between 1 and 999999999.

[User Box Name]

Enter the User Box name (using up to 20 characters).

[Relay Destination]

Select [Search from List], and select a group destination in which fax destinations are registered.

Fax addresses must be included in the group destination to be registered as a relay destination.

[Relay TX Password]

Enter the relay password (using up to eight characters, including symbols # and *).

The entered password is required when you issue a relay request to this machine. Inform the sender of the password you entered here.

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[Output Tray]

Select the tray to which paper is ejected first in Copy, Print, Fax, or Print Report.

Different default values are available for different options installed on this machine.

[Shift Output Each Job]

Select whether to shift paper for each job before ejection (default: [ON]).

[Registering and Changing Addresses]

Select whether to allow the user to register or change destinations (default: [Allow]).

[Biometric/IC Card Information Registration]

When allowing the user to register or when deleting the user’s biometric or card information, set this option to ON (default: OFF).

[Changing the "From" Address]

Select whether to allow the user to change the sender E-mail address ("From" address) (default: [Allow] (without user authentication), [Login User Address] (with user authentication)).

• [Allow]: Allows the user to change the "From" address.

• [Admin. E-mail Address]: Prohibit the change of "From" address and use the administrator's E-mail address.

• [Login User Address]: Prohibit changing of the "From" address and use user's E-mail address. Administrator's E-mail address is used if the user’s E-mail address has not been registered.

[Synchronize User Authentication / Account Track By User]

When allowing the user to change the setting for synchronization between user authentication and account track, set this option to ON (default: ON).

This option is displayed when [Synchronize User Authentication & Account Track] (Here) is set to [Synchronize by User].

[Restrict Program Function Setting]

When prohibiting users from using the copy program or scan/fax program, set this option to ON (default: OFF).

[Multiple Addresses Restriction Setting]

When prohibiting the user from using broadcasting, set this option to ON (default: OFF).

[Prohibit continuous selection of broadcast destinations.]

When displaying the confirmation screen to successively select destinations, set this option to ON (default: ON).

This setting is available when [Multiple Addresses Restriction Setting] is set to OFF.

[Allow full selection of group destinations.]

When displaying the [Select All] button on the Group destination specification screen, set this option to ON (default: OFF).

This setting is available when [Multiple Addresses Restriction Setting] is set to OFF and [Prohibit continuous selection of broadcast destinations.] to ON.

[Changing Job Priority]

When allowing the user to change the job priority order, set this option to ON (default: ON).

[Delete Other User Jobs]

When allowing the user to delete another user's job, set this option to ON (default: OFF).

[Changing Zoom Ratio]

When allowing the user to change the registered zoom ratio, set this option to ON (default: ON).

[Change Registered Overlay]

When allowing the user to overwrite or delete a registered overlay image, set this option to ON (default: ON).

[Registering and Changing Addresses]

Select whether to allow the user to register or change destinations (default: [Allow]).

[Biometric/IC Card Information Registration]

When allowing the user to register or when deleting the user’s biometric or card information, set this option to ON (default: OFF).

[Changing the "From" Address]

Select whether to allow the user to change the sender E-mail address ("From" address) (default: [Allow] (without user authentication), [Login User Address] (with user authentication)).

• [Allow]: Allows the user to change the "From" address.

• [Admin. E-mail Address]: Prohibit the change of "From" address and use the administrator's E-mail address.

• [Login User Address]: Prohibit changing of the "From" address and use user's E-mail address. Administrator's E-mail address is used if the user’s E-mail address has not been registered.

[Synchronize User Authentication / Account Track By User]

When allowing the user to change the setting for synchronization between user authentication and account track, set this option to ON (default: ON).

This option is displayed when [Synchronize User Authentication & Account Track] (Here) is set to [Synchronize by User].

[Restrict Program Function Setting]

When prohibiting users from using the copy program or scan/fax program, set this option to ON (default: OFF).

[Multiple Addresses Restriction Setting]

When prohibiting the user from using broadcasting, set this option to ON (default: OFF).

[Prohibit continuous selection of broadcast destinations.]

When displaying the confirmation screen to successively select destinations, set this option to ON (default: ON).

This setting is available when [Multiple Addresses Restriction Setting] is set to OFF.

[Allow full selection of group destinations.]

When displaying the [Select All] button on the Group destination specification screen, set this option to ON (default: OFF).

This setting is available when [Multiple Addresses Restriction Setting] is set to OFF and [Prohibit continuous selection of broadcast destinations.] to ON.

[Changing Job Priority]

When allowing the user to change the job priority order, set this option to ON (default: ON).

[Delete Other User Jobs]

When allowing the user to delete another user's job, set this option to ON (default: OFF).

[Changing Zoom Ratio]

When allowing the user to change the registered zoom ratio, set this option to ON (default: ON).

[Change Registered Overlay]

When allowing the user to overwrite or delete a registered overlay image, set this option to ON (default: ON).

[Registering and Changing Addresses]

Select whether to allow the user to register or change destinations (default: [Allow]).

[Biometric/IC Card Information Registration]

When allowing the user to register or when deleting the user’s biometric or card information, set this option to ON (default: OFF).

[Changing the "From" Address]

Select whether to allow the user to change the sender E-mail address ("From" address) (default: [Allow] (without user authentication), [Login User Address] (with user authentication)).

• [Allow]: Allows the user to change the "From" address.

• [Admin. E-mail Address]: Prohibit the change of "From" address and use the administrator's E-mail address.

• [Login User Address]: Prohibit changing of the "From" address and use user's E-mail address. Administrator's E-mail address is used if the user’s E-mail address has not been registered.

[Synchronize User Authentication / Account Track By User]

When allowing the user to change the setting for synchronization between user authentication and account track, set this option to ON (default: ON).

This option is displayed when [Synchronize User Authentication & Account Track] (Here) is set to [Synchronize by User].

[Restrict Program Function Setting]

When prohibiting users from using the copy program or scan/fax program, set this option to ON (default: OFF).

[Multiple Addresses Restriction Setting]

When prohibiting the user from using broadcasting, set this option to ON (default: OFF).

[Prohibit continuous selection of broadcast destinations.]

When displaying the confirmation screen to successively select destinations, set this option to ON (default: ON).

This setting is available when [Multiple Addresses Restriction Setting] is set to OFF.

[Allow full selection of group destinations.]

When displaying the [Select All] button on the Group destination specification screen, set this option to ON (default: OFF).

This setting is available when [Multiple Addresses Restriction Setting] is set to OFF and [Prohibit continuous selection of broadcast destinations.] to ON.

[Changing Job Priority]

When allowing the user to change the job priority order, set this option to ON (default: ON).

[Delete Other User Jobs]

When allowing the user to delete another user's job, set this option to ON (default: OFF).

[Changing Zoom Ratio]

When allowing the user to change the registered zoom ratio, set this option to ON (default: ON).

[Change Registered Overlay]

When allowing the user to overwrite or delete a registered overlay image, set this option to ON (default: ON).

[Name]

Enter the name of the header or footer to be registered (using up to 16 characters).

[Color]

Select the color of the text to be printed.

[Pages]

Select the range of pages on which the text is printed in the header/footer.

[Size]

Select the size of the text to be printed.

[Text Type]

Select the font of printing texts.

[Date/Time Setting]

Select the display format of date and time if the [Date/Time Setting] of [Header] or [Footer] is set to [Print].

[Distribution Number]

Specify the content of distribution number to be displayed if the [Distribution Number] of [Header] or [Footer] is set to [Print].

• [Primary Field]: Enter a text to be added to the distribution number for printing (using up to 20 characters).

• [Output Method]: Select the number of digits.

• [Start Number Specification]: Specify the number to start distribution numbers.

[Header]/[Footer]

Specify the items to be printed on header/footer.

• [Header String]/[Footer String]: Enter a text to be printed (using up to 40 characters).

• Select whether to print [Date/Time Setting], [Distribution Number], [Job Number], [Serial Number] (Engineering number of the machine), and [User Name/Account Name].

[Sender Fax No.]

Enter the fax number of this machine (using up to 20 digits, including symbols #, *, +, and spaces).

The fax number you entered is printed as the sender information.

[No.]

Displays the registration number.

[Sender Name]

Enter the sender name (using up to 30 characters).

[Header Position]

Specify the position at which a sender information is printed on a fax (default: [Outside Body Text]).

• [Inside Body Text]: Prints the sender information inside the original image. Part of the original image may be cut off.

• [Outside Body Text]: Prints the sender information outside the original image.

• [OFF]: Does not print sender information. [OFF] is not available in the USA and Hong Kong models.

[TTI Print Position and Character Size]

Select the size of characters to print a sender information (default: [Minimal]).

• [Normal]: Prints the sender information in the normal text size.

• [Minimal]: The character height is half that of the characters in [Normal] size. It is recommended that you select [Minimal] to prevent a fax image from being cut off or to prevent a page from being divided when pages are printed at a receiving machine. If [Normal] is selected for the scanning resolution for sending a fax, it is converted into [Normal] to prevent characters from becoming corrupted and unreadable.

[Print Receiver's Name]

Select whether to print a destination fax number as the sender information (default: [ON]).

If [OFF] is selected, the fax number of this machine is printed instead of the fax number of the destination.

This item is not displayed in the USA and Hong Kong models.

[Footer Position]

Select the position of receiving information to be printed on the received fax (default: [OFF]).

• [Inside Body Text]: Prints the receiving information inside the original image. Part of the original image may be cut off.

• [Outside Body Text]: Prints the receiving information outside the original image.

• [OFF]: Does not print receiving information.

[Header Position]

Specify the position at which a sender information is printed on a fax (default: [Outside Body Text]).

• [Inside Body Text]: Prints the sender information inside the original image. Part of the original image may be cut off.

• [Outside Body Text]: Prints the sender information outside the original image.

• [OFF]: Does not print sender information. [OFF] is not available in the USA and Hong Kong models.

[TTI Print Position and Character Size]

Select the size of characters to print a sender information (default: [Minimal]).

• [Normal]: Prints the sender information in the normal text size.

• [Minimal]: The character height is half that of the characters in [Normal] size. It is recommended that you select [Minimal] to prevent a fax image from being cut off or to prevent a page from being divided when pages are printed at a receiving machine. If [Normal] is selected for the scanning resolution for sending a fax, it is converted into [Normal] to prevent characters from becoming corrupted and unreadable.

[Print Receiver's Name]

Select whether to print a destination fax number as the sender information (default: [ON]).

If [OFF] is selected, the fax number of this machine is printed instead of the fax number of the destination.

This item is not displayed in the USA and Hong Kong models.

[Footer Position]

Select the position of receiving information to be printed on the received fax (default: [OFF]).

• [Inside Body Text]: Prints the receiving information inside the original image. Part of the original image may be cut off.

• [Outside Body Text]: Prints the receiving information outside the original image.

• [OFF]: Does not print receiving information.

[Header Position]

Specify the position at which a sender information is printed on a fax (default: [Outside Body Text]).

• [Inside Body Text]: Prints the sender information inside the original image. Part of the original image may be cut off.

• [Outside Body Text]: Prints the sender information outside the original image.

• [OFF]: Does not print sender information. [OFF] is not available in the USA and Hong Kong models.

[TTI Print Position and Character Size]

Select the size of characters to print a sender information (default: [Minimal]).

• [Normal]: Prints the sender information in the normal text size.

• [Minimal]: The character height is half that of the characters in [Normal] size. It is recommended that you select [Minimal] to prevent a fax image from being cut off or to prevent a page from being divided when pages are printed at a receiving machine. If [Normal] is selected for the scanning resolution for sending a fax, it is converted into [Normal] to prevent characters from becoming corrupted and unreadable.

[Print Receiver's Name]

Select whether to print a destination fax number as the sender information (default: [ON]).

If [OFF] is selected, the fax number of this machine is printed instead of the fax number of the destination.

This item is not displayed in the USA and Hong Kong models.

[Footer Position]

Select the position of receiving information to be printed on the received fax (default: [OFF]).

• [Inside Body Text]: Prints the receiving information inside the original image. Part of the original image may be cut off.

• [Outside Body Text]: Prints the receiving information outside the original image.

• [OFF]: Does not print receiving information.

[Header Position]

Specify the position at which a sender information is printed on a fax (default: [Outside Body Text]).

• [Inside Body Text]: Prints the sender information inside the original image. Part of the original image may be cut off.

• [Outside Body Text]: Prints the sender information outside the original image.

• [OFF]: Does not print sender information. [OFF] is not available in the USA and Hong Kong models.

[TTI Print Position and Character Size]

Select the size of characters to print a sender information (default: [Minimal]).

• [Normal]: Prints the sender information in the normal text size.

• [Minimal]: The character height is half that of the characters in [Normal] size. It is recommended that you select [Minimal] to prevent a fax image from being cut off or to prevent a page from being divided when pages are printed at a receiving machine. If [Normal] is selected for the scanning resolution for sending a fax, it is converted into [Normal] to prevent characters from becoming corrupted and unreadable.

[Print Receiver's Name]

Select whether to print a destination fax number as the sender information (default: [ON]).

If [OFF] is selected, the fax number of this machine is printed instead of the fax number of the destination.

This item is not displayed in the USA and Hong Kong models.

[Footer Position]

Select the position of receiving information to be printed on the received fax (default: [OFF]).

• [Inside Body Text]: Prints the receiving information inside the original image. Part of the original image may be cut off.

• [Outside Body Text]: Prints the receiving information outside the original image.

• [OFF]: Does not print receiving information.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Dialing Method]

Select the line type according to your environment (default: [PB]).

[Receive Mode]

Select the fax receiving method (default: [Auto RX]).

• [Auto RX]: Automatically start receiving a fax if the call is a fax call.

• [Manual RX]: Manually request the reception of a fax. Select this mode if a phone is connected to this machine and you expect frequent voice calls.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials (the setting range varies depending on the local standards).

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials] (default: [3] min.).

[Manual RX V34 Setting]

To cancel the V.34 function when manually receiving a fax, set this option to ON (default: OFF).

[Line Monitor Sound]

When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

[Line Monitor Sound Volume (Send)]

Specify the line monitor sound level during fax transmission (default: [3]).

When communicating with fax, a monitoring sound is generated even if send or receive monitoring sound of this machine is set to [0] since the sound is generated both on this machine and on the destination side. For setting to mute, set both [Line Monitor Sound Volume (Send)] and [Line Monitor Sound Volume (Receive)] to [0], or set [Line Monitor Sound] to OFF.

[Line Monitor Sound Volume (Receive)]

Specify the line monitor sound level during fax receiving (default: [4]).

When monitoring the fax receiving sound, monitor sounds output from the recipient, including switching equipment or TA.

[Pause Time]

Change the interval required to dial pause (P) (default: [1] sec.).

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used (default: [Standard]).

When this machine receives a call signal of the selected pattern, fax receiving starts automatically.

This setting is displayed only in the New Zealand model.

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[F-Code TX]

When using the F-Code TX function, set this option to ON (default: ON).

F-Code TX is a function that send documents to a destination by entering a SUB address and a sender ID (communication password) of a specific User Box. The remote machine must support the F-Code TX/RX. Faxing is possible without specifying a sender ID (communication password). This setting is used for Confidential Communication, Relay Distribution, or PC-Fax RX.

[Relay RX]

When using the Relay RX function, set this option to ON (default: ON).

If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and automatically relay it to multiple programmed destinations.

[Relay Printing]

When distributing a received fax and printing it on this machine while this machine is used as a fax relaying machine, set this option to ON (default: OFF).

[Destination Check Display Function]

Configure the settings to use the destination check display function. A list of specified destinations is displayed before fax transmission.

• [Destination Check Display Function]: When using the destination check display function, set this option to ON (default: OFF).

• [TX Approval Password]: When prompting the user to enter the transmission approval password after a list of specified destinations was displayed, set this option to ON (default: OFF).

• [Password]: Enter the transmission approval password (using up to 64 characters).

[Confirm Address (TX)]

When requesting the user to enter a fax number twice to send a fax by directly entering the fax number, set this option to ON (default: OFF).

[Confirm Address (Register)]

When requesting the user to enter a fax number twice to register it when, for example, registering a destination or forwarding destination, set this option to ON (default: OFF).

[PIN Code Display Mask Function]

Configure a setting to prevent display of the PIN code in a fax report or job history when adding a personal ID (PIN code) to a fax number in order to send a fax. When masking the PIN code part, set this option to ON (default: OFF).

• [Select Separator]: Select a separator to identify the PIN code. To specify the destination, enclose the PIN code with the separators you selected in this option (default: [-]).

When [PIN Code Display Mask Function] is set to ON, the following functions are not available.

• [Fax Settings] - [Function Setting] - [Incomplete TX Hold]

• [Fax Settings] - [Header/Footer Position] - [Print Receiver's Name]

[Reset the setting value after using other functions.]

To clear the setting value including the address when the scan/fax mode or fax mode is changed to another screen, set this option to ON (default: OFF).

[Require the use of the use of the External Line key for outside calling.]

To prohibit the user from entering an outside line number without using the [Outside] key when directly entering the destination's fax number in PBX environment, set this option to ON (default: ON).

If the directly entered number matches the outside line number specified in [PBX Connection Setting] when this option is set to ON, the system prohibits the user from entering the number following the matching number.

This setting is displayed when [PBX Connection Setting] (Here) is set to ON.

[Prohibit fax usage while using ext TEL line.]

When prohibiting a fax while the telephone set connected to the TEL port is in use, set this option to ON (default: ON).

[F-Code TX]

When using the F-Code TX function, set this option to ON (default: ON).

F-Code TX is a function that send documents to a destination by entering a SUB address and a sender ID (communication password) of a specific User Box. The remote machine must support the F-Code TX/RX. Faxing is possible without specifying a sender ID (communication password). This setting is used for Confidential Communication, Relay Distribution, or PC-Fax RX.

[Relay RX]

When using the Relay RX function, set this option to ON (default: ON).

If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and automatically relay it to multiple programmed destinations.

[Relay Printing]

When distributing a received fax and printing it on this machine while this machine is used as a fax relaying machine, set this option to ON (default: OFF).

[Destination Check Display Function]

Configure the settings to use the destination check display function. A list of specified destinations is displayed before fax transmission.

• [Destination Check Display Function]: When using the destination check display function, set this option to ON (default: OFF).

• [TX Approval Password]: When prompting the user to enter the transmission approval password after a list of specified destinations was displayed, set this option to ON (default: OFF).

• [Password]: Enter the transmission approval password (using up to 64 characters).

[Confirm Address (TX)]

When requesting the user to enter a fax number twice to send a fax by directly entering the fax number, set this option to ON (default: OFF).

[Confirm Address (Register)]

When requesting the user to enter a fax number twice to register it when, for example, registering a destination or forwarding destination, set this option to ON (default: OFF).

[PIN Code Display Mask Function]

Configure a setting to prevent display of the PIN code in a fax report or job history when adding a personal ID (PIN code) to a fax number in order to send a fax. When masking the PIN code part, set this option to ON (default: OFF).

• [Select Separator]: Select a separator to identify the PIN code. To specify the destination, enclose the PIN code with the separators you selected in this option (default: [-]).

When [PIN Code Display Mask Function] is set to ON, the following functions are not available.

• [Fax Settings] - [Function Setting] - [Incomplete TX Hold]

• [Fax Settings] - [Header/Footer Position] - [Print Receiver's Name]

[Reset the setting value after using other functions.]

To clear the setting value including the address when the scan/fax mode or fax mode is changed to another screen, set this option to ON (default: OFF).

[Require the use of the use of the External Line key for outside calling.]

To prohibit the user from entering an outside line number without using the [Outside] key when directly entering the destination's fax number in PBX environment, set this option to ON (default: ON).

If the directly entered number matches the outside line number specified in [PBX Connection Setting] when this option is set to ON, the system prohibits the user from entering the number following the matching number.

This setting is displayed when [PBX Connection Setting] (Here) is set to ON.

[Prohibit fax usage while using ext TEL line.]

When prohibiting a fax while the telephone set connected to the TEL port is in use, set this option to ON (default: ON).

[F-Code TX]

When using the F-Code TX function, set this option to ON (default: ON).

F-Code TX is a function that send documents to a destination by entering a SUB address and a sender ID (communication password) of a specific User Box. The remote machine must support the F-Code TX/RX. Faxing is possible without specifying a sender ID (communication password). This setting is used for Confidential Communication, Relay Distribution, or PC-Fax RX.

[Relay RX]

When using the Relay RX function, set this option to ON (default: ON).

If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and automatically relay it to multiple programmed destinations.

[Relay Printing]

When distributing a received fax and printing it on this machine while this machine is used as a fax relaying machine, set this option to ON (default: OFF).

[Destination Check Display Function]

Configure the settings to use the destination check display function. A list of specified destinations is displayed before fax transmission.

• [Destination Check Display Function]: When using the destination check display function, set this option to ON (default: OFF).

• [TX Approval Password]: When prompting the user to enter the transmission approval password after a list of specified destinations was displayed, set this option to ON (default: OFF).

• [Password]: Enter the transmission approval password (using up to 64 characters).

[Confirm Address (TX)]

When requesting the user to enter a fax number twice to send a fax by directly entering the fax number, set this option to ON (default: OFF).

[Confirm Address (Register)]

When requesting the user to enter a fax number twice to register it when, for example, registering a destination or forwarding destination, set this option to ON (default: OFF).

[PIN Code Display Mask Function]

Configure a setting to prevent display of the PIN code in a fax report or job history when adding a personal ID (PIN code) to a fax number in order to send a fax. When masking the PIN code part, set this option to ON (default: OFF).

• [Select Separator]: Select a separator to identify the PIN code. To specify the destination, enclose the PIN code with the separators you selected in this option (default: [-]).

When [PIN Code Display Mask Function] is set to ON, the following functions are not available.

• [Fax Settings] - [Function Setting] - [Incomplete TX Hold]

• [Fax Settings] - [Header/Footer Position] - [Print Receiver's Name]

[Reset the setting value after using other functions.]

To clear the setting value including the address when the scan/fax mode or fax mode is changed to another screen, set this option to ON (default: OFF).

[Require the use of the use of the External Line key for outside calling.]

To prohibit the user from entering an outside line number without using the [Outside] key when directly entering the destination's fax number in PBX environment, set this option to ON (default: ON).

If the directly entered number matches the outside line number specified in [PBX Connection Setting] when this option is set to ON, the system prohibits the user from entering the number following the matching number.

This setting is displayed when [PBX Connection Setting] (Here) is set to ON.

[Prohibit fax usage while using ext TEL line.]

When prohibiting a fax while the telephone set connected to the TEL port is in use, set this option to ON (default: ON).

[F-Code TX]

When using the F-Code TX function, set this option to ON (default: ON).

F-Code TX is a function that send documents to a destination by entering a SUB address and a sender ID (communication password) of a specific User Box. The remote machine must support the F-Code TX/RX. Faxing is possible without specifying a sender ID (communication password). This setting is used for Confidential Communication, Relay Distribution, or PC-Fax RX.

[Relay RX]

When using the Relay RX function, set this option to ON (default: ON).

If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and automatically relay it to multiple programmed destinations.

[Relay Printing]

When distributing a received fax and printing it on this machine while this machine is used as a fax relaying machine, set this option to ON (default: OFF).

[Destination Check Display Function]

Configure the settings to use the destination check display function. A list of specified destinations is displayed before fax transmission.

• [Destination Check Display Function]: When using the destination check display function, set this option to ON (default: OFF).

• [TX Approval Password]: When prompting the user to enter the transmission approval password after a list of specified destinations was displayed, set this option to ON (default: OFF).

• [Password]: Enter the transmission approval password (using up to 64 characters).

[Confirm Address (TX)]

When requesting the user to enter a fax number twice to send a fax by directly entering the fax number, set this option to ON (default: OFF).

[Confirm Address (Register)]

When requesting the user to enter a fax number twice to register it when, for example, registering a destination or forwarding destination, set this option to ON (default: OFF).

[PIN Code Display Mask Function]

Configure a setting to prevent display of the PIN code in a fax report or job history when adding a personal ID (PIN code) to a fax number in order to send a fax. When masking the PIN code part, set this option to ON (default: OFF).

• [Select Separator]: Select a separator to identify the PIN code. To specify the destination, enclose the PIN code with the separators you selected in this option (default: [-]).

When [PIN Code Display Mask Function] is set to ON, the following functions are not available.

• [Fax Settings] - [Function Setting] - [Incomplete TX Hold]

• [Fax Settings] - [Header/Footer Position] - [Print Receiver's Name]

[Reset the setting value after using other functions.]

To clear the setting value including the address when the scan/fax mode or fax mode is changed to another screen, set this option to ON (default: OFF).

[Require the use of the use of the External Line key for outside calling.]

To prohibit the user from entering an outside line number without using the [Outside] key when directly entering the destination's fax number in PBX environment, set this option to ON (default: ON).

If the directly entered number matches the outside line number specified in [PBX Connection Setting] when this option is set to ON, the system prohibits the user from entering the number following the matching number.

This setting is displayed when [PBX Connection Setting] (Here) is set to ON.

[Prohibit fax usage while using ext TEL line.]

When prohibiting a fax while the telephone set connected to the TEL port is in use, set this option to ON (default: ON).

[F-Code TX]

When using the F-Code TX function, set this option to ON (default: ON).

F-Code TX is a function that send documents to a destination by entering a SUB address and a sender ID (communication password) of a specific User Box. The remote machine must support the F-Code TX/RX. Faxing is possible without specifying a sender ID (communication password). This setting is used for Confidential Communication, Relay Distribution, or PC-Fax RX.

[Relay RX]

When using the Relay RX function, set this option to ON (default: ON).

If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and automatically relay it to multiple programmed destinations.

[Relay Printing]

When distributing a received fax and printing it on this machine while this machine is used as a fax relaying machine, set this option to ON (default: OFF).

[Destination Check Display Function]

Configure the settings to use the destination check display function. A list of specified destinations is displayed before fax transmission.

• [Destination Check Display Function]: When using the destination check display function, set this option to ON (default: OFF).

• [TX Approval Password]: When prompting the user to enter the transmission approval password after a list of specified destinations was displayed, set this option to ON (default: OFF).

• [Password]: Enter the transmission approval password (using up to 64 characters).

[Confirm Address (TX)]

When requesting the user to enter a fax number twice to send a fax by directly entering the fax number, set this option to ON (default: OFF).

[Confirm Address (Register)]

When requesting the user to enter a fax number twice to register it when, for example, registering a destination or forwarding destination, set this option to ON (default: OFF).

[PIN Code Display Mask Function]

Configure a setting to prevent display of the PIN code in a fax report or job history when adding a personal ID (PIN code) to a fax number in order to send a fax. When masking the PIN code part, set this option to ON (default: OFF).

• [Select Separator]: Select a separator to identify the PIN code. To specify the destination, enclose the PIN code with the separators you selected in this option (default: [-]).

When [PIN Code Display Mask Function] is set to ON, the following functions are not available.

• [Fax Settings] - [Function Setting] - [Incomplete TX Hold]

• [Fax Settings] - [Header/Footer Position] - [Print Receiver's Name]

[Reset the setting value after using other functions.]

To clear the setting value including the address when the scan/fax mode or fax mode is changed to another screen, set this option to ON (default: OFF).

[Require the use of the use of the External Line key for outside calling.]

To prohibit the user from entering an outside line number without using the [Outside] key when directly entering the destination's fax number in PBX environment, set this option to ON (default: ON).

If the directly entered number matches the outside line number specified in [PBX Connection Setting] when this option is set to ON, the system prohibits the user from entering the number following the matching number.

This setting is displayed when [PBX Connection Setting] (Here) is set to ON.

[Prohibit fax usage while using ext TEL line.]

When prohibiting a fax while the telephone set connected to the TEL port is in use, set this option to ON (default: ON).

[F-Code TX]

When using the F-Code TX function, set this option to ON (default: ON).

F-Code TX is a function that send documents to a destination by entering a SUB address and a sender ID (communication password) of a specific User Box. The remote machine must support the F-Code TX/RX. Faxing is possible without specifying a sender ID (communication password). This setting is used for Confidential Communication, Relay Distribution, or PC-Fax RX.

[Relay RX]

When using the Relay RX function, set this option to ON (default: ON).

If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and automatically relay it to multiple programmed destinations.

[Relay Printing]

When distributing a received fax and printing it on this machine while this machine is used as a fax relaying machine, set this option to ON (default: OFF).

[Destination Check Display Function]

Configure the settings to use the destination check display function. A list of specified destinations is displayed before fax transmission.

• [Destination Check Display Function]: When using the destination check display function, set this option to ON (default: OFF).

• [TX Approval Password]: When prompting the user to enter the transmission approval password after a list of specified destinations was displayed, set this option to ON (default: OFF).

• [Password]: Enter the transmission approval password (using up to 64 characters).

[Confirm Address (TX)]

When requesting the user to enter a fax number twice to send a fax by directly entering the fax number, set this option to ON (default: OFF).

[Confirm Address (Register)]

When requesting the user to enter a fax number twice to register it when, for example, registering a destination or forwarding destination, set this option to ON (default: OFF).

[PIN Code Display Mask Function]

Configure a setting to prevent display of the PIN code in a fax report or job history when adding a personal ID (PIN code) to a fax number in order to send a fax. When masking the PIN code part, set this option to ON (default: OFF).

• [Select Separator]: Select a separator to identify the PIN code. To specify the destination, enclose the PIN code with the separators you selected in this option (default: [-]).

When [PIN Code Display Mask Function] is set to ON, the following functions are not available.

• [Fax Settings] - [Function Setting] - [Incomplete TX Hold]

• [Fax Settings] - [Header/Footer Position] - [Print Receiver's Name]

[Reset the setting value after using other functions.]

To clear the setting value including the address when the scan/fax mode or fax mode is changed to another screen, set this option to ON (default: OFF).

[Require the use of the use of the External Line key for outside calling.]

To prohibit the user from entering an outside line number without using the [Outside] key when directly entering the destination's fax number in PBX environment, set this option to ON (default: ON).

If the directly entered number matches the outside line number specified in [PBX Connection Setting] when this option is set to ON, the system prohibits the user from entering the number following the matching number.

This setting is displayed when [PBX Connection Setting] (Here) is set to ON.

[Prohibit fax usage while using ext TEL line.]

When prohibiting a fax while the telephone set connected to the TEL port is in use, set this option to ON (default: ON).

[F-Code TX]

When using the F-Code TX function, set this option to ON (default: ON).

F-Code TX is a function that send documents to a destination by entering a SUB address and a sender ID (communication password) of a specific User Box. The remote machine must support the F-Code TX/RX. Faxing is possible without specifying a sender ID (communication password). This setting is used for Confidential Communication, Relay Distribution, or PC-Fax RX.

[Relay RX]

When using the Relay RX function, set this option to ON (default: ON).

If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and automatically relay it to multiple programmed destinations.

[Relay Printing]

When distributing a received fax and printing it on this machine while this machine is used as a fax relaying machine, set this option to ON (default: OFF).

[Destination Check Display Function]

Configure the settings to use the destination check display function. A list of specified destinations is displayed before fax transmission.

• [Destination Check Display Function]: When using the destination check display function, set this option to ON (default: OFF).

• [TX Approval Password]: When prompting the user to enter the transmission approval password after a list of specified destinations was displayed, set this option to ON (default: OFF).

• [Password]: Enter the transmission approval password (using up to 64 characters).

[Confirm Address (TX)]

When requesting the user to enter a fax number twice to send a fax by directly entering the fax number, set this option to ON (default: OFF).

[Confirm Address (Register)]

When requesting the user to enter a fax number twice to register it when, for example, registering a destination or forwarding destination, set this option to ON (default: OFF).

[PIN Code Display Mask Function]

Configure a setting to prevent display of the PIN code in a fax report or job history when adding a personal ID (PIN code) to a fax number in order to send a fax. When masking the PIN code part, set this option to ON (default: OFF).

• [Select Separator]: Select a separator to identify the PIN code. To specify the destination, enclose the PIN code with the separators you selected in this option (default: [-]).

When [PIN Code Display Mask Function] is set to ON, the following functions are not available.

• [Fax Settings] - [Function Setting] - [Incomplete TX Hold]

• [Fax Settings] - [Header/Footer Position] - [Print Receiver's Name]

[Reset the setting value after using other functions.]

To clear the setting value including the address when the scan/fax mode or fax mode is changed to another screen, set this option to ON (default: OFF).

[Require the use of the use of the External Line key for outside calling.]

To prohibit the user from entering an outside line number without using the [Outside] key when directly entering the destination's fax number in PBX environment, set this option to ON (default: ON).

If the directly entered number matches the outside line number specified in [PBX Connection Setting] when this option is set to ON, the system prohibits the user from entering the number following the matching number.

This setting is displayed when [PBX Connection Setting] (Here) is set to ON.

[Prohibit fax usage while using ext TEL line.]

When prohibiting a fax while the telephone set connected to the TEL port is in use, set this option to ON (default: ON).

[Memory RX User Box Password]

Enter the password to restrict accesses to the Memory RX User Box (using up to eight digits).

[Forward TX Setting]

When using the Forward TX function, set this option to ON (default: OFF).

[Output Method]

Select whether to print a received fax on this machine when forwarding it (default: [Forward & Print]).

• [Forward & Print]: A received fax is forwarded and printed on this machine.

• [Forward & Print (If TX Fails)]: A received fax is printed on this machine only when forwarding has failed.

[Forward Dest.]

Specify a destination to which to forward a received fax.

• [Select from Address Book]: Forwards a fax to a destination registered in the address book on this machine.

• [Select from Group]: Forwards a fax to a group registered on this machine.

• [Select from User Box No.]: Forwards a User Box registered on this machine.

• [Direct Input]: Forwards a fax to the fax number you enter.

[Select Line]

If multiple lines are used, select the line used to send a fax (default: [No Selection]). If [No Selection] is selected, either line, whichever is not busy, is used for transmission.

[File Type]

Select the file type to forward a fax (default: [PDF]).

You can convert a fax into a file except when the forwarding destination is a fax.

[Page Setting]

Select a filing page unit when a received fax contains multiple pages (default: [Multi Page]).

• [Multi Page]: Converts all pages to a single file.

• [Page Separation]: Select this check box to convert each page to a separate file.

[E-mail Attachment]

You can select the E-mail attachment method when the forward destination is an E-mail address and [Page Setting] is set to [Page Separation] (default: [All Files Sent as one (1) E-mail]).

• [All Files Sent as one (1) E-mail]: Attaches all files to a single E-mail.

• [One (1) File per E-Mail]: Sends one E-mail for each file.

[PC-Fax RX Setting]

Select [Allow] to use the PC-Fax RX function (default: [Restrict]).

[Receiving User Box Destination]

Select either [Memory RX User Box] or [Specified User Box] (a User Box specified in F-Code (SUB Address)) as the location to save received faxes (default: [Memory RX User Box]).

[Print]

When making prints on this machine after receiving a fax, set this option to ON (default: ON).

[Password Check]

To check the communication password (sender ID) when you select [Specified User Box] for [Receiving User Box Destination], set this option to ON (default: OFF).

• [Communication Password]: Enter the communication password (using up to eight digits, including symbols # and *).

[TSI User Box Settings]

When using the TSI User Box function, set this option to ON (default: OFF).

[Action when TSI User Box is not set.]

Select the action to be taken by the machine if a fax number (TSI) is not registered and no forwarding destination is received (default: [Automatically Print]).

• [Automatically Print]: Prints a received fax without saving it in a User Box.

• [Memory RX User Box]: Saves received documents in a Memory RX User Box.

• [Specified User Box]: Saves received documents in a specified User Box. Click [Search from List], then select the User Box to save the received documents from the list.

• [Specified Destination]: Forwards received documents to the specified one-touch destinations. To select the desired forwarding destinations from the address book registered on this machine, click [Search from List].

• [Specified Group]: Forwards received documents to the specified group. To select the desired forwarding destinations from the group registered on this machine, click [Search from List].

[Print]

When making prints on this machine after receiving a fax, set this option to ON (default: OFF).

[Select Line]

Select a sending line when Fax is specified as the forwarding destination (default: [No Selection]).

[Register Forwarding Destination]

[TSI User Box List] is displayed. Register a forwarding destination.

[Sender (TSI)]

Enter the fax number (TSI) of the sender you want to register the forwarding destination in (using up to 20 digits, including symbols #, *, +, and spaces).

[Forwarding Destination]

Specify a forwarding destination when a fax is received from the fax number entered at [Sender (TSI)].

• [Select from Address Book]: Forwards a fax to a destination registered in the address book on this machine.

• [Select from Group]: Forwards a fax to a group registered on this machine.

• [Select from User Box No.]: Forwards a User Box registered on this machine.

[File Type]

Select the file type to forward a fax (default: [PDF]).

You can convert a fax into a file except when the forwarding destination is a fax.

[Page Setting]

Select a filing page unit when a received fax contains multiple pages (default: [Multi Page]).

• [Multi Page]: Converts all pages to a single file.

• [Page Separation]: Select this check box to convert each page to a separate file.

[E-mail Attachment]

You can select the E-mail attachment method when the forward destination is an E-mail address and [Page Setting] is set to [Page Separation] (default: [All Files Sent as one (1) E-mail]).

• [All Files Sent as one (1) E-mail]: Attaches all files to a single E-mail.

• [One (1) File per E-Mail]: Sends one E-mail for each file.

[RX Data Deletion Restriction Settings]

When restricting deletion of the received fax, set this option to ON (default: OFF).

[Password Deletion]

To restrict deletion of received faxes with a password, enter the password (using up to eight digits).

[Administrator User Box Deletion]

Makes a restriction to delete received faxes only when a user logs in with User Box administrator or administrator privileges.

[Administrator User Box Deletion] is displayed when User Authentication or Account Track is enabled and User Box Administrator is specified.

[Closed Network RX Password]

To use the Closed Network RX function, enter the password to restrict peers (using 4 digits).

Inform the peer of the password you entered here.

[Memory RX User Box Password]

Enter the password to restrict accesses to the Memory RX User Box (using up to eight digits).

[Forward TX Setting]

When using the Forward TX function, set this option to ON (default: OFF).

[Output Method]

Select whether to print a received fax on this machine when forwarding it (default: [Forward & Print]).

• [Forward & Print]: A received fax is forwarded and printed on this machine.

• [Forward & Print (If TX Fails)]: A received fax is printed on this machine only when forwarding has failed.

[Forward Dest.]

Specify a destination to which to forward a received fax.

• [Select from Address Book]: Forwards a fax to a destination registered in the address book on this machine.

• [Select from Group]: Forwards a fax to a group registered on this machine.

• [Select from User Box No.]: Forwards a User Box registered on this machine.

• [Direct Input]: Forwards a fax to the fax number you enter.

[Select Line]

If multiple lines are used, select the line used to send a fax (default: [No Selection]). If [No Selection] is selected, either line, whichever is not busy, is used for transmission.

[File Type]

Select the file type to forward a fax (default: [PDF]).

You can convert a fax into a file except when the forwarding destination is a fax.

[Page Setting]

Select a filing page unit when a received fax contains multiple pages (default: [Multi Page]).

• [Multi Page]: Converts all pages to a single file.

• [Page Separation]: Select this check box to convert each page to a separate file.

[E-mail Attachment]

You can select the E-mail attachment method when the forward destination is an E-mail address and [Page Setting] is set to [Page Separation] (default: [All Files Sent as one (1) E-mail]).

• [All Files Sent as one (1) E-mail]: Attaches all files to a single E-mail.

• [One (1) File per E-Mail]: Sends one E-mail for each file.

[PC-Fax RX Setting]

Select [Allow] to use the PC-Fax RX function (default: [Restrict]).

[Receiving User Box Destination]

Select either [Memory RX User Box] or [Specified User Box] (a User Box specified in F-Code (SUB Address)) as the location to save received faxes (default: [Memory RX User Box]).

[Print]

When making prints on this machine after receiving a fax, set this option to ON (default: ON).

[Password Check]

To check the communication password (sender ID) when you select [Specified User Box] for [Receiving User Box Destination], set this option to ON (default: OFF).

• [Communication Password]: Enter the communication password (using up to eight digits, including symbols # and *).

[TSI User Box Settings]

When using the TSI User Box function, set this option to ON (default: OFF).

[Action when TSI User Box is not set.]

Select the action to be taken by the machine if a fax number (TSI) is not registered and no forwarding destination is received (default: [Automatically Print]).

• [Automatically Print]: Prints a received fax without saving it in a User Box.

• [Memory RX User Box]: Saves received documents in a Memory RX User Box.

• [Specified User Box]: Saves received documents in a specified User Box. Click [Search from List], then select the User Box to save the received documents from the list.

• [Specified Destination]: Forwards received documents to the specified one-touch destinations. To select the desired forwarding destinations from the address book registered on this machine, click [Search from List].

• [Specified Group]: Forwards received documents to the specified group. To select the desired forwarding destinations from the group registered on this machine, click [Search from List].

[Print]

When making prints on this machine after receiving a fax, set this option to ON (default: OFF).

[Select Line]

Select a sending line when Fax is specified as the forwarding destination (default: [No Selection]).

[Register Forwarding Destination]

[TSI User Box List] is displayed. Register a forwarding destination.

[Sender (TSI)]

Enter the fax number (TSI) of the sender you want to register the forwarding destination in (using up to 20 digits, including symbols #, *, +, and spaces).

[Forwarding Destination]

Specify a forwarding destination when a fax is received from the fax number entered at [Sender (TSI)].

• [Select from Address Book]: Forwards a fax to a destination registered in the address book on this machine.

• [Select from Group]: Forwards a fax to a group registered on this machine.

• [Select from User Box No.]: Forwards a User Box registered on this machine.

[File Type]

Select the file type to forward a fax (default: [PDF]).

You can convert a fax into a file except when the forwarding destination is a fax.

[Page Setting]

Select a filing page unit when a received fax contains multiple pages (default: [Multi Page]).

• [Multi Page]: Converts all pages to a single file.

• [Page Separation]: Select this check box to convert each page to a separate file.

[E-mail Attachment]

You can select the E-mail attachment method when the forward destination is an E-mail address and [Page Setting] is set to [Page Separation] (default: [All Files Sent as one (1) E-mail]).

• [All Files Sent as one (1) E-mail]: Attaches all files to a single E-mail.

• [One (1) File per E-Mail]: Sends one E-mail for each file.

[Incomplete TX Hold]

When using the Incomplete TX Hold function, set this option to ON (default: OFF).

[File Storage Duration]

Specify the time period during which a fax failed to be sent is stored in the machine's User Box (default: [12] hours).

[PC-Fax Permission Setting]

When allowing the PC-FAX TX, set this option to ON (default: ON).

[Memory RX User Box Password]

Enter the password to restrict accesses to the Memory RX User Box (using up to eight digits).

[Forward TX Setting]

When using the Forward TX function, set this option to ON (default: OFF).

[Output Method]

Select whether to print a received fax on this machine when forwarding it (default: [Forward & Print]).

• [Forward & Print]: A received fax is forwarded and printed on this machine.

• [Forward & Print (If TX Fails)]: A received fax is printed on this machine only when forwarding has failed.

[Forward Dest.]

Specify a destination to which to forward a received fax.

• [Select from Address Book]: Forwards a fax to a destination registered in the address book on this machine.

• [Select from Group]: Forwards a fax to a group registered on this machine.

• [Select from User Box No.]: Forwards a User Box registered on this machine.

• [Direct Input]: Forwards a fax to the fax number you enter.

[Select Line]

If multiple lines are used, select the line used to send a fax (default: [No Selection]). If [No Selection] is selected, either line, whichever is not busy, is used for transmission.

[File Type]

Select the file type to forward a fax (default: [PDF]).

You can convert a fax into a file except when the forwarding destination is a fax.

[Page Setting]

Select a filing page unit when a received fax contains multiple pages (default: [Multi Page]).

• [Multi Page]: Converts all pages to a single file.

• [Page Separation]: Select this check box to convert each page to a separate file.

[E-mail Attachment]

You can select the E-mail attachment method when the forward destination is an E-mail address and [Page Setting] is set to [Page Separation] (default: [All Files Sent as one (1) E-mail]).

• [All Files Sent as one (1) E-mail]: Attaches all files to a single E-mail.

• [One (1) File per E-Mail]: Sends one E-mail for each file.

[PC-Fax RX Setting]

Select [Allow] to use the PC-Fax RX function (default: [Restrict]).

[Receiving User Box Destination]

Select either [Memory RX User Box] or [Specified User Box] (a User Box specified in F-Code (SUB Address)) as the location to save received faxes (default: [Memory RX User Box]).

[Print]

When making prints on this machine after receiving a fax, set this option to ON (default: ON).

[Password Check]

To check the communication password (sender ID) when you select [Specified User Box] for [Receiving User Box Destination], set this option to ON (default: OFF).

• [Communication Password]: Enter the communication password (using up to eight digits, including symbols # and *).

[TSI User Box Settings]

When using the TSI User Box function, set this option to ON (default: OFF).

[Action when TSI User Box is not set.]

Select the action to be taken by the machine if a fax number (TSI) is not registered and no forwarding destination is received (default: [Automatically Print]).

• [Automatically Print]: Prints a received fax without saving it in a User Box.

• [Memory RX User Box]: Saves received documents in a Memory RX User Box.

• [Specified User Box]: Saves received documents in a specified User Box. Click [Search from List], then select the User Box to save the received documents from the list.

• [Specified Destination]: Forwards received documents to the specified one-touch destinations. To select the desired forwarding destinations from the address book registered on this machine, click [Search from List].

• [Specified Group]: Forwards received documents to the specified group. To select the desired forwarding destinations from the group registered on this machine, click [Search from List].

[Print]

When making prints on this machine after receiving a fax, set this option to ON (default: OFF).

[Select Line]

Select a sending line when Fax is specified as the forwarding destination (default: [No Selection]).

[Register Forwarding Destination]

[TSI User Box List] is displayed. Register a forwarding destination.

[Sender (TSI)]

Enter the fax number (TSI) of the sender you want to register the forwarding destination in (using up to 20 digits, including symbols #, *, +, and spaces).

[Forwarding Destination]

Specify a forwarding destination when a fax is received from the fax number entered at [Sender (TSI)].

• [Select from Address Book]: Forwards a fax to a destination registered in the address book on this machine.

• [Select from Group]: Forwards a fax to a group registered on this machine.

• [Select from User Box No.]: Forwards a User Box registered on this machine.

[File Type]

Select the file type to forward a fax (default: [PDF]).

You can convert a fax into a file except when the forwarding destination is a fax.

[Page Setting]

Select a filing page unit when a received fax contains multiple pages (default: [Multi Page]).

• [Multi Page]: Converts all pages to a single file.

• [Page Separation]: Select this check box to convert each page to a separate file.

[E-mail Attachment]

You can select the E-mail attachment method when the forward destination is an E-mail address and [Page Setting] is set to [Page Separation] (default: [All Files Sent as one (1) E-mail]).

• [All Files Sent as one (1) E-mail]: Attaches all files to a single E-mail.

• [One (1) File per E-Mail]: Sends one E-mail for each file.

[Memory RX User Box Password]

Enter the password to restrict accesses to the Memory RX User Box (using up to eight digits).

[Forward TX Setting]

When using the Forward TX function, set this option to ON (default: OFF).

[Output Method]

Select whether to print a received fax on this machine when forwarding it (default: [Forward & Print]).

• [Forward & Print]: A received fax is forwarded and printed on this machine.

• [Forward & Print (If TX Fails)]: A received fax is printed on this machine only when forwarding has failed.

[Forward Dest.]

Specify a destination to which to forward a received fax.

• [Select from Address Book]: Forwards a fax to a destination registered in the address book on this machine.

• [Select from Group]: Forwards a fax to a group registered on this machine.

• [Select from User Box No.]: Forwards a User Box registered on this machine.

• [Direct Input]: Forwards a fax to the fax number you enter.

[Select Line]

If multiple lines are used, select the line used to send a fax (default: [No Selection]). If [No Selection] is selected, either line, whichever is not busy, is used for transmission.

[File Type]

Select the file type to forward a fax (default: [PDF]).

You can convert a fax into a file except when the forwarding destination is a fax.

[Page Setting]

Select a filing page unit when a received fax contains multiple pages (default: [Multi Page]).

• [Multi Page]: Converts all pages to a single file.

• [Page Separation]: Select this check box to convert each page to a separate file.

[E-mail Attachment]

You can select the E-mail attachment method when the forward destination is an E-mail address and [Page Setting] is set to [Page Separation] (default: [All Files Sent as one (1) E-mail]).

• [All Files Sent as one (1) E-mail]: Attaches all files to a single E-mail.

• [One (1) File per E-Mail]: Sends one E-mail for each file.

[PC-Fax RX Setting]

Select [Allow] to use the PC-Fax RX function (default: [Restrict]).

[Receiving User Box Destination]

Select either [Memory RX User Box] or [Specified User Box] (a User Box specified in F-Code (SUB Address)) as the location to save received faxes (default: [Memory RX User Box]).

[Print]

When making prints on this machine after receiving a fax, set this option to ON (default: ON).

[Password Check]

To check the communication password (sender ID) when you select [Specified User Box] for [Receiving User Box Destination], set this option to ON (default: OFF).

• [Communication Password]: Enter the communication password (using up to eight digits, including symbols # and *).

[TSI User Box Settings]

When using the TSI User Box function, set this option to ON (default: OFF).

[Action when TSI User Box is not set.]

Select the action to be taken by the machine if a fax number (TSI) is not registered and no forwarding destination is received (default: [Automatically Print]).

• [Automatically Print]: Prints a received fax without saving it in a User Box.

• [Memory RX User Box]: Saves received documents in a Memory RX User Box.

• [Specified User Box]: Saves received documents in a specified User Box. Click [Search from List], then select the User Box to save the received documents from the list.

• [Specified Destination]: Forwards received documents to the specified one-touch destinations. To select the desired forwarding destinations from the address book registered on this machine, click [Search from List].

• [Specified Group]: Forwards received documents to the specified group. To select the desired forwarding destinations from the group registered on this machine, click [Search from List].

[Print]

When making prints on this machine after receiving a fax, set this option to ON (default: OFF).

[Select Line]

Select a sending line when Fax is specified as the forwarding destination (default: [No Selection]).

[Register Forwarding Destination]

[TSI User Box List] is displayed. Register a forwarding destination.

[Sender (TSI)]

Enter the fax number (TSI) of the sender you want to register the forwarding destination in (using up to 20 digits, including symbols #, *, +, and spaces).

[Forwarding Destination]

Specify a forwarding destination when a fax is received from the fax number entered at [Sender (TSI)].

• [Select from Address Book]: Forwards a fax to a destination registered in the address book on this machine.

• [Select from Group]: Forwards a fax to a group registered on this machine.

• [Select from User Box No.]: Forwards a User Box registered on this machine.

[File Type]

Select the file type to forward a fax (default: [PDF]).

You can convert a fax into a file except when the forwarding destination is a fax.

[Page Setting]

Select a filing page unit when a received fax contains multiple pages (default: [Multi Page]).

• [Multi Page]: Converts all pages to a single file.

• [Page Separation]: Select this check box to convert each page to a separate file.

[E-mail Attachment]

You can select the E-mail attachment method when the forward destination is an E-mail address and [Page Setting] is set to [Page Separation] (default: [All Files Sent as one (1) E-mail]).

• [All Files Sent as one (1) E-mail]: Attaches all files to a single E-mail.

• [One (1) File per E-Mail]: Sends one E-mail for each file.

[Duplex Print (RX)]

When printing a multi-page fax on both sides of paper, set this option to ON (default: OFF).

This item is not available if [Print Separate Fax Pages] is set to ON.

[Letter/Ledger over A4/A3]

When preferentially printing a fax on inch-size paper, set this option to ON (the default value varies depending on the area you are in).

[Print Paper Selection]

Select the criterion of selecting paper for printing a fax (default: [Auto Select]).

• [Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the machine runs out of specified paper, paper of the next closest size is used.

• [Fixed Size]: Always prints a fax on paper specified in [Print Paper Size].

• [Auto Select]: Prints a fax on paper that is automatically selected to suit the fax received.

[Print Paper Size]

Select size of paper for printing a received fax.

The initial value varies depending on the setting for [Letter/Ledger over A4/A3].

[Incorrect User Box No. Entry]

Select the action taken by the machine if an unregistered User Box is specified for receiving a fax using the machine's User Box (default: [Print]).

• [Print]: Prints a received fax without saving it in a User Box.

• [Show Error Message]: Handles the fax as a communication error. It is neither saved nor printed.

• [Auto Create User Box]: Automatically creates a User Box with a specified number and stores documents in it.

[Paper Tray Setting]

Specify the paper tray to print a fax (default: [Auto]).

[Allow Paper Tray Setting]

When [Paper Tray Setting] is set to [Auto], set the tray, which allows fax printing, to ON (default: ON).

[Min. Reduction for RX Print]

Change the reduction ratio when printing a fax (default: [96%]).

[Print Separate Fax Pages]

When printing a fax longer than the standard size on separate pages, set this option to ON (default: OFF).

This item is not available if [Duplex Print (RX)] is set to ON.

[File After Polling TX]

Select whether to delete a file after it is sent in response to a polling request if Polling TX is used to register files for polling (default: [Delete]).

[No. of Sets (RX)]

Change the number of copies to print a fax (default: [1] copy).

[Individual Receiving Line Setup]

When specifying a fax receiving operation for each line while multiple lines are used, set this option to ON (default: OFF).

Selecting OFF applies common settings to all lines for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) and the Closed Network RX function that are to be used on this machine.

Selecting ON applies an individual setting to each line for the fax receiving settings (TSI Routing function, Forward TX function, Memory RX function, or PC-Fax RX function) that are to be used on this machine. Also, the Closed Network RX function can be configured for each line.

[Individual Sender Line Setup]

When using a different sender name for each line while multiple lines are used, set this option to ON (default: OFF).

[TX-Line Auto Switch Setting]

When automatically switching the transmission line depending on the line use conditions while multiple lines are used, set this option to ON (default: ON).

Setting to ON searches for the available line from Line 1 to send a fax. Setting to OFF discards the job.

[RX Document Print Settings]

Select whether to print a received network fax in color or black and white (default: [Full Color/Black]).

To restrict the print to only black and white print, select [Black Only].

[PBX Connection Setting]

When using PBX, set this option to ON (default: OFF).

[Outside Line]

Enter an outside line number (using up to four digits).

When a [Outside] key is selected to specify a destination, the outside line entered in this option is added.

[PBX Dial Tone Detection Settings]

Configure the settings to detect the tone signal for extension connection.

To restrict a PBX connection only for a specific line, service settings must be configured by your service representative. For details, contact your service representative.

[TX Result Report]

Select when to print a report containing the results of fax transmission (default: [If TX Fails]).

• [Always]: The report is printed every time a fax has been sent.

• [If TX Fails]: The report is printed if a fax transmission has failed.

• [OFF]: The report is not printed.

[Tx Result Report Print Confirmation Screen]

Select whether to display a screen that asks if you want to print a TX Result Report each time a fax is sent (default: [OFF]).

[Sequential TX Report]

When printing a report containing results of faxes sent by polling and broadcast, select [ON] (default: [ON]).

[Broadcast Result Report]

Select whether to combine results of broadcast on all destinations involved or list them for each destination (default: [All Destinations]).

[Bulletin TX Report]

When printing a report containing records of faxes registered with the bulletin for being received by polling, select [ON] (default: [ON]).

[Relay TX Result Report]

When printing a report containing results of faxes sent by relay distribution, select [ON] (default: [ON]).

[Tx Result Report Print Settings]

Select the method to output a TX result report (TX result report, broadcast result report, polling TX result report, replay TX result report, or bulletin board polling TX result report) (default: [Print]).

• [Print]: Prints a TX result report on this machine.

• [E-mail Notification]: Sends a TX result report to any destination by E-mail. E-mail settings are required in advance.

If [E-mail Notification] is selected, configure the following items.

• [Notification Address]: Enter the E-mail address of the destination (using up to 320 characters, excluding spaces).

• [Notification Address Priority Setting]: Select a notification destination when User Authentication is enabled (default: [Notification Address]). Selecting [User Address] issues a notification to the E-mail address of the user who logs in to this machine and sends a fax. If the user's E-mail address is not registered, a notification is issued to the destinations registered in [Notification Address]. If [Notification Address] is selected, a notification is always issued to the destination registered in [Notification Address].

• [Report File Attachment]: Select whether to convert a TX result report to a file and attach it to an E-mail (default: [Attach]).

• [Report Image Setting]: Select whether to display the first page of the sent original on a TX result report (default: [With image]).

• [Report File Format]: Select the file type to attach a TX result report to an E-mail (default: [PDF]).

[Activity Report]

Select the timing to print an activity report (default: [Every 100 Comm.]).

• [OFF]: Does not print an activity report.

• [Daily]: Prints an activity report at the time specified in [Output Time Settings] every day.

• [Every 100 Comm.]: Prints an activity report every 100 communications.

• [100/Daily]: Prints an activity report at the time specified in [Output Time Settings] every day. In addition, a report is printed every 100 communications.

[Relay Request Report]

When printing a report when receiving a fax as a relay station, select [ON] (default: [ON]).

[PC-Fax TX Error Report]

To print a report when a PC-Fax TX job cannot be normally received from the computer using the fax driver, select [ON] (default: [OFF]).

[Timer Reservation TX Report]

When printing a report when transmission is reserved using the Timer TX function, select [ON] (default: [ON]).

[Confidential Rx Report]

When printing a report containing results of a confidential receiving fax, select [ON] (default: [ON]).

[Remark Column Print Setup]

Specify whether to print user or account name in the remarks column of the activity report if user authentication or account track is enabled on this machine (default: [Normal Printing]).

• [Normal Printing]: The line status or sending setting will be printed.

• [User Name Printing]: The user name for user authentication will be printed.

• [Account Name Printing]: The account name for user authentication will be printed.

[Network Fax RX Error Report]

To print a report when the machine has failed to receive an Internet fax or IP address fax, select [ON] (default: [ON]).

This setting is displayed when Internet Fax or IP Address Fax is enabled.

[Print Job Number]

Select [ON] to display a job number on a report to be printed (default: [OFF]).

The following reports are targeted for this processing.

• Activity Report

• TX Report

• RX Report

• TX Result Report

• Broadcast Result Report

[MDN Message]

When printing a report notifying that an Internet fax has been sent to the recipient machine, select [ON] (default: [ON]).

This setting is displayed when Internet Fax is enabled.

[DSN Message]

When printing a report notifying that an Internet fax has been sent to the mail server of the recipient machine, select [ON] (default: [OFF]).

This setting is displayed when Internet Fax is enabled.

[Print E-mail Message Body]

Select whether to print a report notifying that an Internet fax has been successfully received after it was received (default: [Print]).

The report has the subject and message body of an Internet fax.

This setting is displayed when Internet Fax is enabled.

[Legend display Settings]

Select [ON] to display an explanatory note on a report to be printed (default: [ON]).

If an explanatory note is omitted, the image of the sent original can be displayed on a larger area.

[PC-Fax TX Line Setting]

Select the line used for PC-FAX TX (default: [No Selection]). If [No Selection] is selected, either line, whichever is not busy, is used for transmission.

[Fax Line Selection]

Tap [Edit] of the line you want to specify the usage for.

[Line Parameter Setting]

Configure your environment for using fax functions in Line 2.

• [Dialing Method]: Select the line type according to your environment (default: [PB]).

• [Number of RX Call Rings]: If necessary, change the number of times the phone rings before automatically receiving a fax (default: [2] times).

• [Line Monitor Sound]: When monitoring the communication sound on the telephone line during fax communication, set this option to ON (default: OFF).

• [Pause Time]: Change the interval required to dial pause (P) (default: [1] sec.).

[Multi Line Settings]

Specify how to use Line 2.

• [Line 2 Setting]: Select the method to use Line 2 from [TX Only], [RX Only], and [TX and RX] (default: [TX and RX]).

• [Sender Fax No.]: Enter the fax number of the additional Line 2 (using up to 20 digits, including symbols + and spaces). The fax number you entered is printed as the sender information.

[Low Resolution]

Select whether to give priority to image quality or speed by lowering the skew adjustment level when printing a received fax with a low resolution (default: [Prioritize Quality]).

If [Prioritize Quality] is selected, an image is corrected.

[High Resolution]

Select whether to give priority to image quality or speed by lowering the skew adjustment level when printing a received fax with a high resolution (default: [Skew adj. level : Low]).

If [Prioritize Quality] is selected, an image is corrected. Note that, for a high resolution fax, image correction is less effective relative to a low resolution fax.