Sending (Basic Operation Flow)
1
Load the original.
When loading the original into the ADF, pull out the Document Stopper (1) to prevent the scanned original from falling.
2
Tap [Scan to PC] on the home screen.
3
Specify the destination.
For details on how to specify a destination, refer to Specifying a Destination.
4
Specify transmission options as needed.
Specify the size of the target original in [Scan Size] (default: [A4] (metric area) / [8-1/2 e 11] (inch area)). If you fail to set the original size correctly, the image may be cut off.
For details on option settings, refer to Transmission Option Settings.
5
Use the Start key to start transmission.
Using the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.
Tips
- You can change the default option setting. For details on the setting procedure, refer to Changing the Default Option Setting in Each Mode.
in the upper-right of a page, it turns into 
and is registered as a bookmark.