[Original Type]

Select the optimum settings for the original to copy it at the optimum image quality.

[Color]

Select a copy color.

[Density]

Adjust the density of a copy image.

[Paper]

Specify the paper tray. You can also change the size and type settings of the paper loaded in paper trays.

[Zoom]

Copy an original image enlarged or reduced by an arbitrary zoom ratio.

[Original -> Output]

Copies an original onto both sides of paper.

[Combine]

Reduces multiple pages on the same side of a single sheet to make copies.

[Group/Sort]

Feeds out copies separately page by page, for example: "111", "222", "333", "444", and "555".

[Inch.Mixed original]

When an original consists of multiple pages of different sizes, the pages can be scanned at one time by using the ADF if they have the same width in the inch size.

[Blank Page Removal]

Removes blank pages from scan targets. Blank pages detected are not counted as original pages. Select this option to scan the original using the ADF.

[Binding Position]

Specify the binding position to suit the orientation of the target original.

[Original Size]

Select the size of the original to be scanned.

[Original Direction]

When scanning a 2-sided original, specify the original loading direction so that the vertical direction of the scanned original is set correctly.

[Book Original]^*

You can copy two-page spreads such as books and catalogs separately into the left and right pages, or copy as one page.

[Page Separation]^*

Copy two-page spreads, such as a catalog with the staples removed, separately into the left and right pages.

[Separate Scan]

If the number of original sheets is so large that they cannot be loaded on the ADF at the same time, you can load them in several batches and handle them as one job.

[Background Removal]^*

Adjust the density of the background area when copying originals with colored background (newsprints, recycle paper, etc.) or originals that are so thin that text or images on the back would be scanned.

[Text Enhancement]^*

Highlights photos or texts when a text is superimposed over photos (figure, graph, etc.).

[Glossy]^*

Copies an image with a glossy finish.

[Neg-/Pos. Reverse]^*

Reverses the contrast and colors of an image to make copies. The finished image looks like a negative print photo.

[Background Color]^*

Colors the blank area of the original with a specified background color to make copies.

[Color Adjust]^*

Adjusts the color quality (brightness, saturation, color balance, etc.) of the original to make copies.

[Booklet]

Sorts original data pages like a booklet and copies on both sides in spread.

[Page Margin]^*

Adds a margin to bind copied sheets before printing. Select a paper binding position and adjust the binding width at the binding position.

[Image Shift]^*

You can fine tune the image position by shifting it in a horizontal or vertical direction according to the paper size.

[Mirror Image]^*

Copy the original image by reversing its left and right, like a reflection image on the mirror.

[Image Repeat]^*

Copies an original page repeatedly onto the same side of a single sheet.

[Poster Mode]^*

Enlarges an original image, and divides it into multiple sheets to make copies. When you join the printed sheets, you can create a large image like a poster.

[Image Adjust]^*

Specify how to arrange the original image on the paper. You can enlarge a part of the original to the maximum limits of the paper, or arrange the original image at the center of the page while the original size remains unchanged.

[Cover Sheet]^*

You can insert a cover sheet before the first page or after the last page of the text.

[Insert Sheet]^*

Inserts paper (colored paper, thick paper, etc.) different from a text page before the specified page.

[Insert Image]^*

Inserts the original scanned on the Original Glass after the page you have specified in the original scanned using the ADF.

[Chapters]^*

Makes copies so that the first page of each chapter is always printed on the front side of paper when an original is copied onto both sides of paper.

[Date/Time]^*

Adds the print date/time to printouts.

[Page Number]^*

Adds page and chapter numbers on printed sheets.

[Stamp]^*

Adds a text such as "PLEASE REPLY" or "DO NOT COPY".

[Stamp Repeat]^*

Prints a stamp such as "Copy" or "Private" on the entire page.

[Header/Footer]^*

Adds the date, time, and any desired text in the top and bottom margins (header/footer) of the specified page.

[Watermark]^*

Prints a text such as "Copy" or "Private" on the center of all pages in a tint color.

[Copy Protect]^*

Prints a text such as "Copy" or "Private" in the background pattern as a concealed text.

[Frame Erase]

Erases the four sides of the original by the same width amount. You can also specify the width to be erased for each side.

[Non-Image Area Erase]

Automatically detects the original and erases shadows outside the original when making copies with the ADF open and the original placed on the Original Glass.

[Program Jobs]^*

Scans each loaded original with different settings, and makes copies collectively.

[Card Shot]

Arranges the front and back sides of the card on the same side of a single page to make copies when you want to copy cards.