Copying on Postcards
Loading paper in Tray 1
Up to 20 postcards can be loaded into the Tray 1.
1
Load the original.
2
Tap [Copy] on the home screen.
3
Pull out Tray 1.
4
When loading postcards into the Tray 1, note the following points.
When loading curled postcards, uncurl the postcards as shown in the figure in advance.
5
Load postcards into the tray with the print side facing up, turning the short side to the right side of the tray (paper feed port).
6
Slide the Lateral Guide to fit the size of the loaded paper.
NOTICE
- Exercise care to ensure that there is no clearance between the Lateral Guide and paper.
7
Close Tray 1.
8
Tap [Env / Postcard] ([Envelope / 4e6], [Envelope / A6 Card]) from [Paper Size].
9
Select [Postcard] ([4e6], [A6 Card]) from [Env / Postcard] ([Envelope / 4e6], [Envelope / A6 Card]).
When [Postcard] ([4e6], [A6 Card]) is specified for the paper size, the paper type is automatically set to [Postcard].
10
Tap [OK].
11
Use the Start key to start copying.
Loading paper in Bypass Tray
Up to 20 postcards can be loaded into the Bypass Tray.
1
Load the original.
2
Tap [Copy] on the home screen.
3
When loading postcards into the Bypass Tray, note the following points.
When loading curled postcards, uncurl the postcards as shown in the figure in advance.
4
With the print side facing down, load postcards in the w direction as shown in the figure.
Insert postcards into the tray until their edges are pressed against the back.
5
Slide the Lateral Guide to fit the size of the loaded paper.
6
On the Paper Setting screen, tap [Env / Postcard] ([Envelope / 4e6] or [Envelope / A6 Card]) in [Paper Size].
7
Select [Postcard] ([4e6], [A6 Card]) from [Env / Postcard] ([Envelope / 4e6], [Envelope / A6 Card]).
When [Postcard] ([4e6], [A6 Card]) is specified for the paper size, the paper type is automatically set to [Postcard].
8
Tap [OK].
9
Use the Start key to start copying.
in the upper-right of a page, it turns into 
and is registered as a bookmark.