* Enter the name of the utility key. You can search descriptions of utility keys.
IEEE802.1x Setting
To display: [Utility][Administrator Settings][Network Settings][IEEE802.1x Setting]
Configure settings to operate this machine as a supplicant (client to be authenticated) in [Supplicant Setting].
This setting is displayed when [Network I/F Configuration] is set to [Wireless Only]. In a wireless-only environment, if [WPA-EAP(AES)] or [WPA2-EAP(AES)] is selected in [Wireless Network Setting] - [Manual Setting] - [Authentication/Encryption Algorithm], configure the supplicant settings. For details on [Wireless Network Setting], refer to [Wireless Network Setting] .
Settings | Description |
---|---|
[User ID] | Enter a user ID (using up to 128 characters). This user ID is used for all EAP-Type options. |
[Password] | Enter a password with 128 characters. The password is used for all EAP-Type options other than [EAP-TLS]. |
[Server ID] | To verify CN of the certificate, enter the server ID (using up to 64 characters). |
[EAP Type] | Select an EAP authentication method.
[No] is specified by default. |
[EAP-TTLS Internal Authentication Settings] | Configure the EAP-TTLS settings if [EAP Type] is set to [EAP-TTLS] or [Depend on Server].
|
[Client Certificate] | Select whether to encrypt the authentication information using a certificate for this machine, if necessary. This setting can be configured if the following conditions are satisfied:
|
[Encryption Strength] | If [EAP-TLS], [EAP-TTLS], [PEAP], or [Depend on Server] is selected from [EAP Type], select an encryption strength for encryption by TLS, if necessary.
|
[Certificate Verification Level Settings] | To verify the certificate, select items to be verified. If you select [Confirm] at each item, the certificate is verified for each item.
|