SNMP Settings
To display: [Utility][Administrator Settings][Network Settings][SNMP Settings]
Configure the settings to obtain information of this machine or to monitor the machine using Simple Network Management Protocol (SNMP).
Settings | Description |
---|
[ON]/[OFF] | Select whether to use SNMP. [ON] is specified by default. |
[SNMP v1/v2c(IP)] | Select whether to use SNMP v1 or SNMP v2. [ON] is specified by default. |
[SNMP v3(IP)] | Select whether to use SNMP v3. [ON] is specified by default. |
[UDP Port Number] | If necessary, change the UDP port number. In normal circumstances, you can use the original port number. [161] is specified by default. |
[SNMP v1/v2c Settings] | Tap [SNMP v1/v2c Settings] to configure SNMP v1 or v2c settings. [Read Community Name Settings]: Enter a read-only community name (using up to 15 characters). [public] is specified by default. [Write Setting]: Select whether to enable the read and write functions. [Enable] is specified by default. [Write Community Name Settings]: If [Write Setting] is set to [Enable], enter the community name in the read-write enable state (using up to 15 characters). [private] is specified by default.
|
[SNMP v3 Settings] | Tap [SNMP v3 Settings] to configure SNMP v3 settings. [Context Name Settings]: Enter the context name (using up to 63 characters). [Discovery User Permissions]: Select whether to allow a discovery user. [ON] is specified by default. [Discovery User Name Settings]: If [Discovery User Permissions] is set to [ON], enter the discovery user name (using up to 32 characters). [public] is specified by default. [Read User Name Settings]: Enter the read-only user name (using up to 32 characters). [initial] is specified by default. [Security Level]: Select a security level for the read-only user. [auth-password/priv-password] is specified by default. [Write User Name Settings]: Enter the user name of the user in the read-write enable state (using up to 32 characters). [restrict] is specified by default. [Security Level]: Select a security level of the user in the read-write enable state. [auth-password/priv-password] is specified by default. [Password Setting]: Enter the authentication password and privacy password of users in the read-only state and read-write enable state. [Encryption Algorithm]: Select an encryption algorithm. [DES] is specified by default. [Authentication Algorithm]: Select an authentication algorithm. [MD5] is specified by default.
|
[TRAP Setting] | Select whether to allow a notification of the status of this machine using the SNMP TRAP function. [Allow] is specified by default. |
[TRAP Setting When Authentication Failed] | Select whether to send TRAP when authentication fails. [Disable] is specified by default. |