* Enter the name of the utility key. You can search descriptions of utility keys.
SMB Settings
To display: [Utility][Administrator Settings][Network Settings][SMB Settings]
Set the SMB (Server Message Block) operating environment.
Settings | Description |
|---|---|
[Client Settings] | Configure settings to enable use of the SMB client function of this machine. For details, refer to [Client Settings] . |
[SMB Server Settings] | Configure the settings to operate this machine as the SMB server. Specify the SMB protocol to be supported, or configure the setting for SMB printing or SMB file sharing. For details, refer to [SMB Server Settings] . |
[WINS/NetBIOS Settings] | If the WINS server is installed to resolve the name, register it. For details, refer to [WINS/NetBIOS Settings] . |
[Direct Hosting Setting] | Select whether to enable the direct hosting SMB service. If enabled, a peer can be specified using the IP address (IPv4 or IPv6) or host name. For details, refer to [Direct Hosting Setting] . |
[SMB Browsing setting] | Select whether to check if there are sub folders when searching for an SMB sharing folder on the network. For details, refer to [SMB Browsing setting] . |