* Enter the name of the utility key. You can search descriptions of utility keys.

ThinPrint Setting

To display: [Utility][Administrator Settings][Network Settings][ThinPrint Setting]

Configure the settings to use the ThinPrint function.

ThinPrint is a function that realizes speedy printing by performing data compression or broadband control when sending a print job from ThinPrint Engine (.print Engine) to this machine used as ThinPrint Client (.print Client).

Settings

Description

[ON]/[OFF]

Select whether to use the ThinPrint function.

Select [ON] to use this machine as ThinPrint Client (.print Client).

[ON] is specified by default.

[Port Number]

Enter the port number of ThinPrint Engine (.print Engine) to be connected.

[4000] is specified by default.

[Data Size before Compression]

Specify the maximum packet size to compress data in the ThinPrint Engine (.print Engine) side.

ThinPrint Engine (.print Engine) compresses data in these sizes before sending a print job to this machine.

[8192] is specified by default.

[Connection Timeout]

Enter the connection timeout period to send a print job from ThinPrint Engine (.print Engine).

[90] is specified by default.

[Printer Name]

Enter the printer name of this machine to be used in ThinPrint Engine (.print Engine).

[Printer Class Name]

Enter the printer class name of this machine to be used in ThinPrint Engine (.print Engine).

[Certificate Verification Level Settings]

To verify the certificate, select items to be verified.

  • [Expiration Date]: Confirm whether the certificate is within the validity period. [Confirm] is specified by default.

  • [Key Usage]: Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer. [Do Not Confirm] is specified by default.

  • [Chain]: Confirm whether there is a problem in the certificate chain (certificate path). The chain is validated by referencing the external certificates managed on this machine. [Do Not Confirm] is specified by default.

  • [Expiration Date Confirmation]: Confirm whether the certificate has expired. [Do Not Confirm] is specified by default.

  • [CN]: Confirm whether CN (Common Name) of the certificate matches the server address. [Do Not Confirm] is specified by default.

[Connection Service Setting]

Select whether to use Connection Service. [OFF] is specified by default.

If [ON] is selected, configure the following settings.

  • [Server Address]: Enter the address of the server that supplies Connection Service.

  • [Port Number]: Enter the number of the port that is used for Connection Service.

  • [AYT Interval]: Enter the reconnection interval to check Connection Service operations in seconds. [60] is specified by default.

  • [Client ID]: Enter the client ID of this machine to be used for Connection Service. [1] is specified by default.

  • [Authentication Key]: Enter the authentication key used to connect to Connection Service. [0] is specified by default.

[Checking Connection Service Setting]

Displays the status of the connection with Connection Service.

Tips
  • To use this function, the optional i-Option LK-111 is required.