Q19. Can I arrange so that the margin does not come out in black when copying with the ADF opened?

Operation procedure

  1. Place the original on the Original Glass.

  2. Tap [Copy].

  3. Tap [Application], select [Non-Image Area Erase], then select [ON].

  4. Press the Start key to start copying of the original.

    supplementary explanationThe size of the original automatically detected is 3/8 inch by 3/8 inch (10 mm by 10 mm) or larger. If the size detection fails, a blank sheet of paper is output.

    supplementary explanationThe original image may be cut off at its top or end.