Q7. Can I copy the original with its headers and punch holes erased?

Operation procedure

  1. Load the original.

  2. Tap [Copy].

  3. Tap [Application] and select [Frame Erase].

  4. Tap [ON].

  5. To erase the four sides of the original by the same width, tap [+] and [-] to specify the width to be deleted.

    supplementary explanationTo display the Keypad, tap the input area for the numeral. If necessary, you can specify the width to be deleted using the Keypad.

  6. To specify the width of the frame to be erased individually, tap [Frame] to clear the check box, select a target side, then tap [+] or [-] to specify the width to be erased.

    supplementary explanationTo display the Keypad, tap the input area for the numeral. If necessary, you can specify the width to be deleted using the Keypad.

    supplementary explanationWhen specifying the erase width individually, you can set to exclude a side from erasing by selecting the side and canceling the setting of [Erase] for that side.

  7. Tap [OK].

  8. Press the Start key to start scanning of the original.

    supplementary explanationPress the Preview key (default: Register key 4) before the Start key to check the finishing on the Touch Panel. For the procedure for checking the finish, refer to [Q16. Can I check the finish before starting copying?] .