Q6. How can I send a clear fax?

Operation procedure: Setting the resolution

  1. Load the original.

  2. Tap [Scan/Fax] and select a destination.

  3. Select [Resolution], then select the desired resolution.

    supplementary explanationThe greater the value, the finer granularity is achieved for the image.

  4. Tap [OK].

  5. Press the Start key to start scanning of the original.

    supplementary explanationPress the Preview key (default: Register key 4) before the Start key to check the finishing on the Touch Panel. For the procedure for checking the finish, refer to [Checking the Finish before Sending] .

Operation procedure: Specifying image quality according to the quality of the original

  1. Load the original.

  2. Tap [Scan/Fax] and select a destination.

  3. Tap [Application] to select [Original Type], then select an option according to the quality of the original to be faxed.

  4. Tap [Close].

  5. Press the Start key to start scanning of the original.

    supplementary explanationPress the Preview key (default: Register key 4) before the Start key to check the finishing on the Touch Panel. For the procedure for checking the finish, refer to [Checking the Finish before Sending] .