Fully Using Copy Functions

Settings Anyone can Change

To customize the initial display of the main screen in the copy mode ([Copier Settings])
To display a screen indicating that a copy job is in progress ([Copy Screen])
To specify whether to automatically change to the optimum zoom ratio when [Combine] or [Booklet] is enabled ([Auto Zoom for Combine/Booklet])
To automatically specify [Booklet] when the [Booklet] setting screen is displayed ([Booklet Short Cut Mode])
To register the frequently copy functions as the standard ([Default Copy Settings])
To register the frequently copy function (Enlarge Display) as the standard ([Default Enlarge Display Settings])
To specify which operations are to be carried out when the original direction is different from the paper direction while [Zoom] is set to [Auto] ([When AMS Direction is Incorrect])
To specify the timing to start copying when scanning an original for [Separate Scan] ([Separate Scan Output Method])
To automatically change the selected paper tray when paper is loaded into the bypass tray ([Select Tray for Paper Insertion function.])
To select a paper tray you want to insert paper into for Cover Sheet, Insert Sheet, and Chapters ([Select Tray for Insert Sheet])
To collectively configure the frequently used finishing functions on the main screen in the copy mode ([Finishing Program])
To change the default of [Card Shot] or register any card size ([Card Shot Settings])

Settings only the Administrators can Change