[Auto Zoom (Platen)]

If you want to set [Zoom] to [Auto] when selecting paper for copying after loading an original on the Original Glass, set this option to ON (default: OFF).

[Auto Zoom (ADF)]

If you want to set [Zoom] to [Auto] when selecting paper for copying after loading an original on the ADF, set this option to ON (default: ON).

[Specify Default Tray when APS Off]

Select a paper tray to switch to after releasing the selection of [Auto] for [Paper] (default: [Tray Before APS ON]).

• [Tray Before APS ON]: Switches to the paper tray specified before releasing the selection of [Auto].

• [Default Tray]: Switches to Tray 1.

[Print Jobs During Copy Operation]

Select the operation to be performed when a print job or fax job is received during copy operations on the Touch Panel (default: [Print]).

• [Print]: Immediately prints a print or fax job.

• [Receive Only]: Prints a print or fax job after copy operations are completed.

[Combine]

Select the number of original pages to be copied on a single page (default: [2in1]).

[Duplex Settings]

Select a combination of original scanning side (Simplex/Duplex) and original printing side (Simplex/Duplex) (default: [1-Sided > 2-Sided]).