[Auto Zoom for Combine/Booklet]

Select whether to adjust the image automatically to optimal zoom ratio when you specify [Combine] or [Booklet] and select [Auto] for [Paper] (default: [Auto Display Zoom]).

• [Auto Display Zoom]: Automatically adjusts to the optimal zoom ratio. The following zoom ratios are specified according to the function.
  <Metric area>
  [2in1], [Booklet]: 70.7%
  [4in1]: 50.0%
  [8in1]: 35.3%
  <Inch area>
  [2in1], [Booklet]: 64.7%
  [4in1]: 50.0%
  [8in1]: 32.3%

• [Disable]: Select this option to specify a zoom ratio manually.

[Booklet shortcut mode setting]

Select whether to automatically set the Booklet function to ON when the setting screen for [Booklet] is displayed (default: OFF).

[Default Copy Settings]

Change the default settings (settings when the power is turned on, or the Reset key is used) in the copy mode (default: [Factory Default]).

You can change the setting by selecting [Current Setting] after the setting in the copy mode is changed.

[Default Enlarge Display Settings]

When Enlarge Display is selected, change the default settings (settings when the power is turned on, or the Reset key is used) in the copy mode (default: [Factory Default]).

You can change the setting by selecting [Current Setting] after the setting in the copy mode is changed.

[Incorrect AMS direction settings]

When you have selected [Auto] in [Zoom], select whether to print the original even if the original loading direction is different from the paper direction (default: [Print]).

• [Print]: Makes prints regardless of the original loading direction.

• [Delete Job]: Deletes the job if the original loading direction is different from the paper direction.

[Separate Scan Output Method]

Select the timing to start printing when scanning an original by specifying [Separate Scan] (default: [Page Print]).

• [Page Print]: Starts printing while the original is being scanned. Select this option if you want to focus on efficiency.

• [Batch Print]: Starts printing after all originals were scanned. You can delete data before printing begins if you find an incorrect setting etc.

[Select Tray for Paper Insertion function.]

When automatically selecting Bypass Tray as the paper tray while paper is loaded in the Bypass Tray, select [Bypass] (default: [Bypass]).

The paper tray is changed to the Bypass Tray when paper is loaded into the Bypass Tray, and the paper setting screen is displayed.

[Auto Zoom (Platen)]

If you want to set [Zoom] to [Auto] when selecting paper for copying after loading an original on the Original Glass, set this option to ON (default: OFF).

[Auto Zoom (ADF)]

If you want to set [Zoom] to [Auto] when selecting paper for copying after loading an original on the ADF, set this option to ON (default: ON).

[Specify Default Tray when APS Off]

Select a paper tray to switch to after releasing the selection of [Auto] for [Paper] (default: [Tray Before APS ON]).

• [Tray Before APS ON]: Switches to the paper tray specified before releasing the selection of [Auto].

• [Default Tray]: Switches to Tray 1.

[Print Jobs During Copy Operation]

Select the operation to be performed when a print job or fax job is received during copy operations on the Touch Panel (default: [Print]).

• [Print]: Immediately prints a print or fax job.

• [Receive Only]: Prints a print or fax job after copy operations are completed.

[Select Tray for Insert Sheet]

Configure the default paper tray loaded with paper when the [Cover Sheet], [Insert Sheet], or [Chapters] is set (default: [Tray 2]).

[Layout]

Select the default setting where to place the front and back sides of a card (default: [Top/Bottom]).

• [Top/Bottom]: Place the front side on the top and the back side on the bottom of the paper.

• [Left/Right (Top Half)]: Place the front side on the upper left and the back side on the upper right of paper.

• [Left/Right]: Place the front side on the left and the back side on the right of paper.

[Zoom]

Select the default zoom ratio for copying (default: [Full Size]).

• [Full Size]: Makes a copy that fits to the original size.

• [X1.0]: Copy with the same size as the card.

[Store Original Size1] to [Store Original Size4]

Register the card size frequently used for copy. The registered size can be recalled on the [ID Card Shot] setting screen.