User's Guide
Adjustment Flow when changing the screen
When you change the screen, perform the following image quality adjustment.
Tips
This adjustment is the same as the adjustment when the machine was introduced (setup).
If you use Package Color Auto Adj., this machine automatically makes the adjustments in step 2 below and after.
To use this function, install Integrated Color Care Unit IQ-501. For details, refer to [Package Color Auto Adj.].
Screen selection
In response to the setting (assignment) change of the screen, select the screen to be used.
Auto Gamma Adjustment
This automatically adjusts the color reproducibility of the whole paper to be output.
Density Balance Adjustment
Automatically adjust the density balance.
Color Density Control
Set the Periodical Adj. Execution of Basic Setting to ON, and perform Color Density Manual Control as needed.
Color Density Control: Basic Setting
Color Density Control: Color Density Manual Control
To use special paper or increase the accuracy of the automatic adjustment, Each Paper Type Color Adj. is recommended. For details, refer to Color Density Control: Each Paper Type Color Adjustment.
Gray balance adjustment
Increase reproducibility of the gray balance.
To switch this adjustment to G7 calibration, contact your service representative.