Punch Kit PK-522

Applicable unit

Finisher FS-532

Type

Punch kit that is built in the finisher

Paper size

2 holes:

Standard: A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed, A5 short edge feed/long edge feed, 11 17 short edge feed, 9  11 long edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed/long edge feed, 5.5 8.5 short edge feed/long edge feed, Foolscap^*, 8K short edge feed, 16K short edge feed/long edge feed

3 holes / 4 holes:

A3 short edge feed, B4 short edge feed, A4 short edge feed, B5 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 11 short edge feed, 8K short edge feed, 16K short edge feed

*: Foolscap refers to 8.5 13 short edge feed, 8.25 13 short edge feed, 8.12 13.25 short edge feed, and 8 13 short edge feed.

Paper type

Plain, Fine, Color Specific, Coated (Recommended paper for the machine is recommended for each type)

Paper weight

60 g/m² to 300 g/m² / 15 lb Bond to 81 lb Bond

Number of punch holes

Metric area: 2 holes / 4 holes, Swedish 4 holes (Available only in Sweden)

Inch area: 2 holes / 3 holes

Hole pitch

Metric area: 80 mm / 3.15" (2 holes / 4 holes), 21 mm, 70 mm, 21 mm / 0.83", 2.76", 0.83" (Swedish 4 holes)

Inch area: 70 mm / 2.76" (2 holes), 108 mm / 4.25" (3 holes)

Hole diameter

Metric area: 6.5 mm / 0.26" (2 holes / 4 holes / Swedish 4 holes)

Inch area: 8.0 mm / 0.31" (2 holes / 3 holes)

Maximum power consumption

30 W or less

Dimensions

156.1 mm (W) 592.3 mm (D) 180.7 mm (H) / 6.15" (W) 23.32" (D) 7.11" (H)

Power source

Supplied from the equipment connected previously to the unit.

Weight

4.5 kg / 9.92 lb