Pre-output Image Quality Adjustment

To reproduce stable colors with the machine, use pre-output image quality adjustment.

Understand the image adjustment flow (which timing, which image quality adjustment, in what order), and then make adjustment as needed.

If the Integrated Color Care Unit IQ-501 is mounted, you can adjust the colors or check if they become closer to the target colors.

First, check the image quality adjustment flow.

Three types of the image quality adjustment are provided; you can use any of them according to your controller. For the recommended processing timing of the image quality adjustment flow or the adjustment order, refer to the followings:

Image Quality Adjustment Flow of Image Controller IC-603

Image Quality Adjustment Flow of Image Controller IC-417 or Image Controller IC-313

Then, proceed with individual adjustment according to the image quality adjustment flow.

Understand the image quality adjustment flow first. For details about individual adjustment procedure, refer to the followings:

Screen Selection (Adjustment Flow When Changing the Screen)

Gamma Automatic Adjustment (Adjustment Flow When Changing the Screen / Regular Adjustment Flow (High Accuracy))

Density Balance Adjustment (Adjustment Flow When Changing the Screen)

Calibration / Advanced Calibration (Adjustment Flow When Changing the Screen / Regular Adjustment Flow (Standard) / Regular Adjustment Flow (High Accuracy))

Maximum Density Adjustment (Regular Adjustment Flow (High Accuracy))

Color Density Control (Adjustment Flow When Changing the Screen / Regular Adjustment Flow (Standard) / Regular Adjustment Flow (High Accuracy))