Home Settings and AdjustmentsGamma Automatic Adjustment (Adjustment Flow When Changing the Screen / Regular Adjustment Flow (High Accuracy))

Gamma Automatic Adjustment (Adjustment Flow When Changing the Screen / Regular Adjustment Flow (High Accuracy))

This automatically adjusts the color reproducibility of the whole paper to be output.

• Image quality adjustment flow and the position of this adjustment

  • In the pre-output image quality adjustment flow, this adjustment is positioned shown below.

  • Perform the previous adjustment before proceeding with this adjustment.

  • When Integrated Color Care Unit IQ-501 is mounted on the machine, this adjustment is positioned in the same way as the above.

  • To not continuously perform the series of adjustment of the image quality adjustment flow, perform the gamma automatic adjustment, and then resume from the next adjustment.

- For Image Controller IC-603:

Image quality adjustment flow

Position of this adjustment

Previous adjustment

This adjustment

Next adjustment

Adjustment flow when changing the screen

Without RU

(STEP 1: Screen selection)

STEP 2: This adjustment

(STEP 3: Density balance adjustment)

With RU

(STEP 1: Screen selection)

STEP 2: This adjustment

(STEP 3: Density balance adjustment)

Regular adjustment flow (Standard)

Without RU

- (None)

With RU

Regular adjustment flow (High accuracy)

Without RU

- (None)

STEP 1: This adjustment

(STEP 2: Maximum density adjustment)

With RU

- (None)

STEP 2: This adjustment

(STEP 3: Maximum density adjustment)

- For Image Controller IC-417 or Image Controller IC-313:

Image quality adjustment flow

Position of this adjustment

Previous adjustment

This adjustment

Next adjustment

Adjustment flow when changing the screen

Without RU

(STEP 1: Screen selection)

STEP 2: This adjustment

- (None)

With RU

(STEP 1: Screen selection)

STEP 2: This adjustment

(STEP 3: Density balance adjustment)

Fine adjustment flow (High accuracy)

Without RU

- (None)

STEP 1: This adjustment

(STEP 2: Maximum density adjustment)

With RU

- (None)

STEP 2: This adjustment

(STEP 3: Maximum density adjustment)

  1. On the touch panel of the main body, press [Adjustment] on the [MACHINE] screen.

    The [Adjustment Menu] is displayed.

  2. Press [Execute Adjust Operation] on the [Adjustment Menu] screen.

  3. Press [Gamma Automatic Adj.] and press [OK].

  4. Press [Exit [ADJUSTMENT]].

    Wait for the display "Now adjusting" to disappear.