[AutoInspect.Report]
Overview
[AutoInspect.Report] is a function that allows you to check the result of [Auto Inspection].
You can check reports that did not meet the inspection level on the Touch panel of this system.
NOTICE
All the following options are required to use this function.
- Intelligent Quality Optimizer IQ-601
- Auto Inspection Unit AI-101
- Option with waste paper output tray (compatible finisher or Relay Unit RU-702)
- Video Interface Kit VI-514
- Video Interface Kit VI-515
NOTICE
The following setting is required to use this function.
- Set [Auto Inspection NIC Setting].
NOTICE
To create an automatic inspection report, perform automatic inspection by making one of the following settings:
- Set [Common Setting] - [Create Auto Inspection Report] of [User Setting] or [Administrator Setting] to [ON].
- Set [Create Auto Inspection Report] in [IQ Function Set.] to [ON].
Tips
- If you access Web Utilities (Auto Inspection Unit AI-101) from your computer's browser, you can download the automatic inspection report results and view more detailed information. For details about Web Utilities (Auto Inspection Unit AI-101), refer to Web Utilities (Auto Inspection Unit AI-101).
Reference
- For details about [Auto Inspection NIC Setting], refer to [Auto Inspection NIC Setting].
in the upper-right of a page, it turns into 
and is registered as a bookmark.