HomeSearch by PurposeCustomizing the Control Panel Environment

Search by Purpose

Customizing the Control Panel Environment

Settings Anyone can Change

To change the language to be displayed on the touch panel ([Language Selection])

To display:
  • [Utility]
    • [User Settings]
      • [System Settings]
        • [Language Selection]

Specify a language displayed in the Touch Panel and a language used for keyboard input.

Settings

Description

[Language Selection Display]

Select a language display in the Touch Panel.

[English] is specified by default.

[Panel Keyboard Language Selection]

Select a keyboard language displayed in the Touch Panel.

  • [Panel Display Language Synchronize]: Synchronize with the language displayed in the Touch Panel.

  • [Panel Display Language Desynchronize]: Select a keyboard language.

[Panel Display Language Synchronize] is specified by default.

[External Keyboard Language Selection]

Select a keyboard language if you are using an external keyboard.

  • [Panel Display Language Synchronize]: Synchronize with the language displayed in the Touch Panel.

  • [Panel Display Language Desynchronize]: Select a keyboard language.

[Panel Display Language Desynchronize] is specified by default.

To change the type of the character entry screen ([Select Keyboard])

To display:
  • [Utility]
    • [User Settings]
      • [System Settings]
        • [Select Keyboard]

Select a keyboard type displayed in the Touch Panel.

Settings

Description

[Standard Keyboard]

The US ASCII layout keyboard or JIS layout keyboard is displayed.

[Standard Keyboard] is specified by default.

[Local Keyboard]

The keyboard corresponding to the language setting is displayed.

To change the unit of numeric values ([Measurement Unit Settings])

To display:
  • [Utility]
    • [User Settings]
      • [System Settings]
        • [Measurement Unit Settings]

Select a system of units for numeric values displayed in the Touch Panel.

Settings

Description

[mm (Numerical Value)]

Numeric values are displayed in units of mm.

For the centimeter area, [mm (Numerical Value)] is specified as default.

[inch (Numerical Value)]

Numeric values are displayed in units of inch with decimal point.

[inch (Fraction)]

Numeric values are displayed in units of inch with fraction display.

For the inch area, [inch (Fraction)] is specified as default.

To configure operation related settings when connecting to a tablet terminal ([Remote Access setting])

To display:
  • [Utility]
    • [User Settings]
      • [System Settings]
        • [Remote Access Setting]

Configure settings concerning operations for connecting an Android or iOS tablet terminal.

These settings are displayed only when an Android or iOS tablet terminal is connected.

Settings

Description

[IME Auto Display Setting]

Select whether to use the text entry application when registering destinations on an Android or iOS tablet terminal.

Selecting [ON] enables the text entry application the user is familiar with.

[OFF] is specified by default.

To customize the function keys to be displayed on the main screen in the copy mode ([Function Display Key (Copy/Print)])

To display:
  • [Utility]
    • [User Settings]
      • [Custom Display Settings]
        • [Function Display Key(Copy/Print)]

Change the function key to be displayed in the main screen in the copy mode and the print settings screen in the User Box mode.

Select a function key number, and specify the function to assign.

The following shows the default settings for the inch area.

  • [Function Key 1]: [Original Type]

  • [Function Key 2]: [Color]

  • [Function Key 3]: [Booklet]

  • [Function Key 4]: [Paper]

  • [Function Key 5]: [Zoom]

  • [Function Key 6]: [Duplex/Combination]

  • [Function Key 7]: [Finishing]

  • [Function Key 8]: [Density]

  • Other function keys: [OFF]

The following shows the default settings for the centimeter area.

  • [Function Key 1]: [Original Type]

  • [Function Key 2]: [Color]

  • [Function Key 3]: [Density]

  • [Function Key 4]: [Paper]

  • [Function Key 5]: [Zoom]

  • [Function Key 6]: [Duplex/Combination]

  • [Function Key 7]: [Finishing]

  • Other function keys: [OFF]

  • The above functions can be configured when you are allowed to change a function key by the administrator.

To customize the function keys to be displayed on the main screen in the scan/fax mode ([Function Display Key (Send/Save)])

To display:
  • [Utility]
    • [User Settings]
      • [Custom Display Settings]
        • [Function Display Key(Send/Save)]

Change the function key to be displayed in the main screen in fax/scan mode and the send and save settings screens in User Box mode.

Select a function key number, and specify the function to assign.

The following shows the default functions.

  • [Function Key 1]: [Simplex/Duplex]

  • [Function Key 2]: [Resolution]

  • [Function Key 3]: [Color]

  • [Function Key 4]: [File Type]

  • [Function Key 5]: [Scan Size]

  • [Function Key 6]: [E-mail Settings]

  • [Function Key 7]: [OFF]

  • The above functions can be configured when you are allowed to change a function key by the administrator.

To change the default method for displaying the [Application] screen in each mode ([Default Application Screen Type Setting])

To display:
  • [Utility]
    • [User Settings]
      • [Custom Display Settings]
        • [Default Application Screen Type Setting]

Select the default value to display the [Application] screen in each mode.

[Mapscroller] is specified by default.

To specify whether to display in animation view when opening or closing the pop-up window on the touch panel ([Animation Settings])

To display:
  • [Utility]
    • [User Settings]
      • [Custom Display Settings]
        • [Animation Settings]

Select whether to display in animation view when opening or closing a pop-up window. If [No] is selected, you will not hear any operation confirmation sound when opening a pop-up window.

[Yes] is specified by default.

To change the default values displayed in the left side area of [Utility] ([Left Panel Display Default])

To display:
  • [Utility]
    • [User Settings]
      • [Custom Display Settings]
        • [Left Panel Default Display Settings]

Select the default display value for the left area in [Utility] from [Bookmark] or [keypad].

[Bookmark] is specified by default.

To enlarge or reduce the panel display using pinch gestures ([Accessibility Settings])

To display:
  • [Utility]
    • [User Settings]
      • [Custom Display Settings]
        • [Accessibility Settings]

Configure settings concerning panel operations of this machine.

Settings

Description

[Zoom Display Setting]

Select whether to enlarge the entire panel screen of this machine using the pinch gesture.

When enlarging, you can drag to move the display area while maintaining the zoom ratio.

[Yes] is specified by default.

Settings only the Administrators can Change

To customize the keys to be displayed on the main menu ([Main Menu Default Settings])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Custom Display Settings]
          • [Main Menu Default Settings]

Configure shortcut keys that are displayed in the main menu.

Select the number of the main menu key to which you want to assign a shortcut key and configure a function to be assigned. [Main Menu Key 1] to [Main Menu Key 11] are assigned to the first screen of the main menu. These keys should be assigned to commonly-used functions.

Settings

Description

[ON]/[OFF]

Specify whether to assign a shortcut key to main menu keys.

The following shows the default settings.

  • [Main Menu Key 1]: [ON]/[Copy]

  • [Main Menu Key 2]: [ON]/[Scan/Fax]

  • [Main Menu Key 3]: [ON]/[User Box]

  • [Main Menu Key 4]: [ON]/[Sound Setting]

  • Other Main Menu Keys: [Do Not Use]

[Function]

Select a function mode to be assigned to a shortcut key.

This enables the main screen in the selected mode to be displayed from the main menu.

[Copy Function Settings]

Select a setting for the Copy mode to be assigned to a shortcut key.

This enables the setting screen for the selected Copy mode to be displayed from the main menu.

[Scan/Fax Function Settings]

Select a setting for the Scan/Fax mode to be assigned to a shortcut key.

This enables the setting screen for the selected Scan/Fax mode to be displayed from the main menu.

[Copy Program]

Select a copy program to be assigned to a shortcut key.

This enables the screen incorporating the contents of the selected copy program to be displayed from the main menu.

This option is available when copy programs are registered on this machine.

[Fax/Scan Program]

Select a fax/scan program to be assigned to a shortcut key.

This enables the screen incorporating the contents of the selected fax/scan program to be displayed from the main menu.

This option is available when fax/scan programs are registered on this machine.

[System User Box]

Select a System User Box to be assigned to a shortcut key.

This enables the screen for the selected System User Box to be displayed from the main menu.

[Sound Setting]

Assign [Sound Setting] of [Accessibility] to a shortcut key.

This allows you to display the [Sound Setting] screen from the main menu.

  • If you have assigned a copy or fax/scan program to the appropriate main menu key, you can select an icon that is to be displayed in the main menu by tapping the [Icon] on [Main Menu Default Settings] screen.

To change the background color and other options of the main menu ([Main Menu Display Settings])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Custom Display Settings]
          • [Main Menu Display Settings]

Change the background color, etc. for the main menu as desired.

[Theme1] is specified by default.

To change the display pattern of function keys to be displayed in each mode ([Custom Function Pattern Selection])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Custom Display Settings]
          • [Custom Function Pattern Selection]

Change the display pattern of function keys in the Copy, Scan/Fax and User Box modes, respectively.

Settings

Description

[Copy/Print]

Select a display pattern of function keys to be displayed in the print settings screen in Copy or User Box mode.

  • [Full Functions]: Displays all function keys.

  • [Standard Functions] (Not displayed in some area): Displays commonly used function keys.

  • [Basic Functions]: Displays the more basic function keys than [Standard Functions].

Tap [Details] to check the functions that can be used in the respective display patterns.

[Full Functions] is specified by default.

[Send/Save]

Select a display pattern of function keys to be displayed on the send and save settings screens in Fax/Scan and User Box modes.

  • [Full Functions]: Displays all function keys.

  • [Standard Functions] (Not displayed in some area): Displays commonly used function keys.

  • [Basic Functions]: Displays the more basic function keys than [Standard Functions].

Tap [Details] to check the functions that can be used in the respective display patterns.

[Full] is specified by default.

To allow users to change the function key display pattern in each mode by user or account ([User/Admin Function Permissions])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Custom Display Settings]
          • [User/Admin Function Permissions]

Specify whether to allow changes of the function key display pattern by user/account when user authentication/account track is enabled.

[Restrict] is specified by default.

To allow a change of function keys to be displayed on the main screen in each mode ([Function Display Key Permission Setting])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Custom Display Settings]
          • [Function Display Key Permission Setting]

Specify whether to allow users to change the function keys to be displayed in the Copy, Scan/Fax and User Box modes, respectively.

Settings

Description

[Copy/Print]

Select whether or not to allow a change of function keys to be displayedon the main screen in the copy mode and the print settings screen in theUser Box mode.

[Restrict] is specified by default.

[Send/Save]

Select whether or not to allow a change of function keys to be displayedon the main screen in the fax/scan mode and the send or save settingsscreen in the User Box mode.

[Restrict] is specified by default.

To temporarily change the language to be displayed on the touch panel ([Temporary Change Language Setting])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Custom Display Settings]
          • [Temporary Change Language Setting]

Specify whether to display [Language] for temporarily changing the display language on the Touch Panel.

[OFF] is specified by default.

To change functions to be assigned to the Register 1 to Register 3 keys on the control panel ([Registered Key Settings])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Registered Key Settings]

Change the functions to be assigned to Register 1 key to Register 3 key on the Control Panel.

You cannot select a function assigned to other Register key.

The following shows the default settings for the inch area.

  • Register key 1: [Scan/Fax]

  • Register key 2: [Copy]

  • Register key 3: [10 Keypad]

The following shows the default settings for the centimeter area.

  • Register key 1: [User Box]

  • Register key 2: [Scan/Fax]

  • Register key 3: [Copy]

To enlarge the initial display of the touch panel ([Display Default Settings])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Enlarge Display Settings]
          • [Display Default Settings]

Select whether to use Enlarge Display mode as the initial display of the Touch Panel.

If you select [Yes], specify whether or not to enable Enlarge Display mode when Reset is pressed in the Normal Display mode.

[No] is specified by default.

To inherit the settings configured in the normal screen display when switching the screen from Normal to Enlarge Display ([Apply Basic Setting to Enlarge Display])

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Enlarge Display Settings]
          • [Apply Basic Setting to Enlarge Display]

Select whether to inherit the settings configured on the normal screen display when switching the screen from Normal to Enlarge Display.

Settings

Description

[Mode 1]

Inherit all normal mode settings.

[Mode 2]

In Copy mode, only inherit Normal mode settings that can be set in Enlarge Display mode. In Fax/Scan mode, reset the settings.

[Mode 2] is specified by default.