Saving on a USB Flash Drive

Press [SCAN] tab.

Press [USB].

• As default, the E-mail address list is displayed. The default destination tab of the [SCAN] screen can be set at Utility/Counter - [User Setting] - [Scan Setting]. For details, refer to Scan Setting: Setting the Default Values for Scan Functions.

Connect the USB flash drive to a USB port.

Press [USB Memory] in the address list.

• The register name of the selected USB flash drive is displayed in [List] on the left side of the screen.

• To deselect the register name, press the selected register name again.

Press [Scan Settings].

Set the scan conditions.

• For details, refer to Scan Settings Screen.

• Press [File Name] if you want to specify the file name.

Set an original, and then press Start on the control panel.

The original is scanned, and the scan data are saved to an specified address.

• To return to the [SCAN] screen, press [Address].

• The settings on the Scan Settings screen and the address selected on the [SCAN] screen may remain until the machine is restarted. It is recommended to release the setting and address once the operation is completed.

• To clear the setting, press Reset on the control panel when the Scan Settings screen is displayed. To clear the address, press [Address] to return to the [SCAN] screen, and then press [Clear All], or press Reset on the control panel.