Overview of Scan to SMB

You can send the data scanned from the machine's ADF or the original glass (scan data) to the SMB server.

The scan data sent to the SMB server can be file-shared with computers with the SMB protocol.

For details about how to operate it, refer to Sending to an SMB Server.

If you use Scan to SMB with Image Controller IC-602 and Mac OS X 10.7 or later, the following settings are required.

You set [NTLMv2] in [NTLM Setting]. Scan to SMB supports only [NTLMv2]. For details about the setting, refer to Controller NIC Setting Menu: Configuring the Network Information of the Controller.

Match the date, the time, and the time zone between this machine and the computers. For details about the date/time setting of the machine, refer to Date/Time Setting: Setting the Date and Time.