[MACHINE] Screen

1

[MACHINE] tab

Displays the [MACHINE] screen.

2

Perfect binder heater switch

Turns ON or OFF the PB (perfect binder) heater. If you know when to use the perfect binder in advance, turn it ON so that you can work efficiently.

When you do not use the heater, turn it OFF to prevent the deterioration of glue.

3

Perfect binder/main body warming-up status bar

Indicates the warming-up status while the perfect binder or main body is warming up. When the warming up operation is completed, the status bar disappears.

4

Info. Sound/Voice ON/OFF

Turns ON or OFF all information sounds or voices.

5

Help

Displays the help message which provides information about the screen currently displayed. Depending on the screen,  may be shaded and no help message can be displayed.

When you press it in the [MACHINE] screen, the instructions to replace toners, replace waste toner boxes, add staples, dump the scrap of punching, stapling and trimming, supply glue pellets, and load paper are displayed.

6

Output information indicator

Displays the print count, set count, and job number of the current job while printing.

7

Machine management information indicator

Displays the number of reserved job, remaining memory amount, original count, and file system amount.

8

Scanner message

Displays the status of the original scan of the Reverse Automatic Document Feeder DF-626 (ADF)/Original glass.

9

[Execute Sample Print]

Makes a sample print during an output job. It is displayed when the machine is mounted with Image Controller IC-602.

10

Machine configuration display

Displays the configuration of main body and options.

11

[Size]/[Size (Unit: mm)]

Switches the custom size indication between [Custom] and actual dimensions in millimeters/inches. The sizes are displayed in millimeters by default. Switching between millimeters and inches can be made from the [UTILITY] screen. For details, refer to Unit Setting: Selecting the Unit for Values.

12

Tray information indicator
(tray 1 to tray 5)

Displays paper size, orientation, name, weight, and paper amount in the tray.

13

Tray information indicator (upper tray and lower tray of the post inserter, cover tray)

For the machine equipped with Folding Unit FD-503, it provides information on paper size, orientation, name, weight and paper amount of the upper tray and lower tray of the post inserter.

For the machine equipped with Perfect Binder PB-503, it provides information on paper size, orientation, name, weight, and paper amount of the PB cover tray.

If Post Inserter PI-502 is mounted, it provides information on paper size and paper amount of the upper tray and lower tray of the post inserter.

14

[Outside Temp.] and [Outside Humidity]

Displays outside temperature and outside humidity that are detected with the temperature and humidity sensor mounted on the machine.

15

Machine function keys switch

Switches the display of the machine function keys.

16

Machine status indicator/right

Displays [Fuser (Env.)], [Toner], [PM Call], [ADF Clean], [Drum/Dev.], [Security], [Modem Err], [ORU-M] or [Rotation]. Up to 4 indicators can be displayed in large size. When 5 or more indicators are displayed, small icons without texts will substitute for the indicators from the 5th and onward. The maximum number of items displayed is a total of 7, including 3 normal-size icons and 4 small-size icons. [Fuser A] and [Fuser B] may be displayed depending on the settings. For details, contact your service representative.

17

Machine function keys display area

Sample Print Set.: Configures a setting for sample print. It is displayed when the machine is mounted with Image Controller IC-602.

Curl Adjustment: Performs curl adjustment for each tray (tray 1 to tray 5). When Humidifier HM-102 is mounted on Relay Unit RU-509, you can make the humidification setting for each tray.

Controller: Configures the controller.

Adjustment: Adjusts the main body and optional equipment.

Both Sides: Makes adjustments for images printed on the front and back sides of paper loaded in each tray (tray 1 to tray 5, bypass tray), as well as for registration loop, chart adjustment and gap adjustment.

Paper Setting: Specifies the paper conditions for the main body trays, Paper Feeder Unit PF-602m, Paper Feeder Unit PF-707, Multi Bypass Tray MB-506, Large Capacity Unit LU-202, the upper tray/lower tray of Post Inserter PI-502, the upper tray/lower tray of Post Inserter mounted on Folding Unit FD-503 and the cover tray of Perfect Binder PB-503.

18

Machine status indicator/left

Displays the current time or the status of the image controller.

19

Consumable and Scrap Indicators area

Displays the current status of toner supply. Also, it notifies via a red indicator when staples need to be supplied to the optionally mounted stapler, when the waste toner box/hole-punch scrap box is full, or when water needs to be supplied to the humidifier.

The number of replacements of the toner bottle can be counted. For details, contact your service representative.

20

Job display area

Displays the current status of the jobs to be operated on the machine. When there are any incomplete jobs, the [Incomp. History] key is displayed.

21

Message area

Displays messages concerning the current status of the machine or operation currently required.