* Enter the name of the utility key. You can search descriptions of utility keys.
Expert Adjustment
To display: [Utility][Administrator Settings][System Settings][Expert Adjustment]
Specify this setting if the color tone of the print image, staple, hole-punch, and folding positions are changed. You can adjust various settings such as correction of printed image, adjustment of staple, hole-punch, and folding positions.
Settings | Description |
|---|---|
[AE Level Adjustment] | Adjust the AE (Auto Exposure) level. For details, refer to [AE Level Adjustment] . |
[Printer Adjustment] | Adjust the print start position and defective print images. For details, refer to [Printer Adjustment] . |
[Finisher Adjustment] | Adjust the staple, punch or fold position. For details, refer to [Finisher Adjustment] . |
[Density Adjustment] | Adjust the density of images that are printed on thick paper, transparencies, or envelopes for each paper type and print color. For details, refer to [Density Adjustment] . |
[Image Stabilization] | Correct the misalignment or tilt of scanning area caused by changes in the temperature or humidity in the machine to ensure high quality printing. For details, refer to [Image Stabilization] . |
[Paper Separation Adjustment] | Adjust the paper separation position on each side of paper for 2-sided printing. For details, refer to [Paper Separation Adjustment] . |
[Color Registration Adjust] | Adjust the print position with respect to each color if color shifts are detected in the print result. For details, refer to [Color Registration Adjust] . |
[Gradation Adjustment] | Adjust gradation when reproduction quality of the printed image is degraded. For details, refer to [Gradation Adjustment] . |
[Density Balance Adjust] | If uneven density detected in the printing result, adjust the density balance. For details, refer to [Density Balance Adjust] . |
[Scanner Area] | Adjust the scan range of the scanner. For details, contact your service representative. |
[ADF Adjustment] | Make adjustments for scanning images in the ADF. For details, contact your service representative. |
[Line Detection] | Set this option for the dirt detection level for the Slit Scan Glass and cleaning of the Slit Scan Glass. For details, refer to [Line Detection] . |
[Trail Edge Adjust] | Correct the color misalignment if the trailing edge of the printed image is out of alignment. For details, refer to [Trail Edge Adjust] . |
[User Paper Settings] | Register special paper with [User Paper 1] through [User Paper 6]. Settings to configure include Basic Weight and Media Adjustment. For details on displaying this item, contact your service representative. |
[Erase Adjustment] | Specify the operation and erase method when erasing the area outside the original by setting [Non-Image Area Erase]. For details, refer to [Erase Adjustment] . |
[PS Designer Settings] | This option is available when [Simulation Profile] for the PS driver is set to [Auto]. For details, refer to [PS Designer Settings] . |