Settings	Description
[Center Staple Position]	If the staple position is not on the fold line on saddle-stitched paper, use this option to align the staple position on the fold. For details, refer to [Center Staple Position] .
[Half-Fold Position]	If the half-fold position is not on the exact center of the paper, use this option to align the fold on the center. For details, refer to [Half-Fold Position] .
[1st Tri-Fold Position Adjustment]	If the tri-fold positions are not located evenly, use this option to adjust the first fold position. For details, refer to [1st Tri-Fold Position Adjustment] .
[2nd Tri-Fold Position Adjustment]	If the tri-fold positions are not located evenly, use this option to adjust the second fold position. For details, refer to [2nd Tri-Fold Position Adjustment] .
[Tri-Fold Output Setting]	Use this option to select whether to output tri-folded paper to the normal position or a position further away from the normal position set for this machine. For details, refer to [Tri-Fold Output Setting] .
[Punch Vertical Position Adjustment]	If the positions of the punch holes on the paper are displaced vertically, use this option to adjust the punch hole positions. For details, refer to [Punch Vertical Position Adjustment] .
[Punch Horizontal Position Adjustment]	If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch hole positions. For details, refer to [Punch Horizontal Position Adjustment] .
[Punch Regist Loop Size Adjustment]	If the positions of the punch holes on the paper are not in parallel with the paper edge, use this option to correct the obliquity of the paper to make them parallel. For details, refer to [Punch Regist Loop Size Adjustment] .
[Punch Edge Sensor Adjustment]	Use this option to adjust the sensor of the Punch function to detect the edge of the paper. For details, refer to [Punch Edge Sensor Adjustment] .
[Vertical Punch (Z-Fold) Position Adjustment]	If the positions of the punch holes on the paper are displaced vertically, use this option to adjust the punch hole positions. For details, refer to [Vertical Punch (Z-Fold) Position Adjustment] .
[Horizontal Punch (Z-Fold) Position Adjustment]	If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch hole positions. For details, refer to [Horizontal Punch (Z-Fold) Position Adjustment] .
[1st Z-Fold Position Adjustment]	Use this option to adjust the 1st Z-fold position. For details, refer to [1st Z-Fold Position Adjustment] .
[2nd Z-Fold Position Adjustment]	Use this option to adjust the 2nd Z-fold position. For details, refer to [2nd Z-Fold Position Adjustment] .
[Post Inserter Tray Size Adjustment]	If the size of the paper loaded in the Post Inserter is not detected correctly, use this option to make an automatic adjustment so that the paper size is detected correctly. For details, refer to [Post Inserter Tray Size Adjustment] .
[Paper Alignment Plate Settings]	If paper is not discharged with the edges aligned, use this option to adjust the effective width of the paper alignment plate to ensure discharged paper is stored neatly. For details, refer to [Paper Alignment Plate Settings] .