Sending a Fax with a Password ([Password TX])

Password TX

The Password TX is a function that sends a fax with a password. It is used to send faxes to a device on which fax peers are restricted by passwords (a device with Closed Network RX enabled).

Tips
  • You can only use this function to communicate with our models supporting the closed network reception (password) function.

  • You need to check the recipient's closed network reception password beforehand.

  • This function cannot be used together with the following functions:
    Relay Distribution, Confidential Communication, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board).

Reference

Operation flow

  1. Load the original.

  2. Tap [Scan/Fax].

  3. Specify the destination.

  4. Tap [Application] - [Fax Setting] - [Password TX], then tap [ON].

  5. Using the Keypad, enter the Closed Network RX password of the destination, then tap [OK].

    supplementary explanationTo display the Keypad, tap the input area for the numeral.

  6. Press the Start key.

    Transmission begins.