Issuing a Scan Request from an AirPrint-Compatible Mac
Before using AirPrint
Before using AirPrint, check that the conditions for using AirPrint are met for your AirPrint-compatible terminal and this machine. For details, refer to Before using AirPrint.
Scan transmission function
In a Mac environment, you can automatically detect an AirPrint-compatible scanner on the same network and request scanning. You can import data scanned on this machine to your Mac and use it.
Tips
- The file type supports PDF, JPEG, and TIFF.
- If user authentication is enabled on this machine, a scan job is processed as a public user's job.
Preparation required to use this function (for the administrator)
Configure settings to enable the scan transmission function.
For details on the setting procedure, refer to Configuring the Environment for Scan Transmission by AirPrint.
Restriction
After you select [Utility] - [Administrator] - [Network] - [AirPrint Setting] - [Scan Setting] and set [Scan] to ON, if you select [Utility] - [Administrator] - [Network] - [Bonjour Setting] and change [Bonjour] to OFF, [Scan] also changes to OFF synchronously.
How to issue a scan request
Use a Mac to perform scanning.
The procedure may vary depending on the application to be used.
1
Load the original on this machine.
2
Start the application that supports scanning using the AirPrint.
3
Display the scanner selection screen, then select the desired scanner.
4
Change the scan setting if necessary.
5
Execute scanning.
The original is scanned and imported to the Mac.
Tips
- Simultaneous reception of multiple scan jobs is not covered by this machine's warranty.
in the upper-right of a page, it turns into 
and is registered as a bookmark.