* Enter the name of the utility key. You can search descriptions of utility keys.

Printer Adjustment

To display: [Utility][Administrator Settings][System Settings][Expert Adjustment][Printer Adjustment]

Adjust the print start position and defective print images.

Settings

Description

[Leading Edge Adjustment]

Adjust the print start position at the leading edge of the paper relative to the paper discharge direction.

For details, refer to [Leading Edge Adjustment] .

[Centering]

Adjust the print start position on the left edge of the paper relative to the paper discharge direction.

For details, refer to [Centering] .

[Leading Edge Adjustment (Duplex Side 2)]

Adjust the print start position at the leading edge of the back side of the paper relative to the paper discharge direction for printing the back side in 2-sided printing.

For details, refer to [Leading Edge Adjustment (Duplex Side 2)] .

[Centering (Duplex 2nd Side)]

Adjust the print start position at the left edge of the paper relative to the paper discharge direction for printing the back side in 2-sided printing.

For details, refer to [Centering (Duplex 2nd Side)] .

[Erase Leading Edge]

Adjust leading edge erase width. For details, contact your service representative.

[Vertical Adjustment]

Adjust the feed direction zoom ratio of paper types. For details, contact your service representative.

[Media Adjustment]

Adjust print defects (voids, white spots, roughness) that are caused by paper properties for each paper type.

For details, refer to [Media Adjustment] .

Leading Edge Adjustment

Centering

Leading Edge Adjustment (Duplex Side 2)

Centering (Duplex 2nd Side)

Erase Leading Edge

Vertical Adjustment

Media Adjustment