* Enter the name of the utility key. You can search descriptions of utility keys.

Leading Edge Adjustment

To display: [Utility][Administrator Settings][System Settings][Expert Adjustment][Printer Adjustment][Leading Edge Adjustment]

Adjust the print start position at the leading edge of the paper relative to the paper discharge direction.

Press the Start key to print a test pattern. Check the test pattern and adjust so that the margin between the leading edge of the paper and the print start position is 3/16 inch (4.2 mm). Repeat adjustments, as required.

Settings

Description

[Paper Type]

Select the type of paper that is used to adjust the start position for printing.

[Adjust Value]

Enter an adjustment value between -3.0 and 3.0 mm by tapping [-] and [+].

[0.0 mm] is specified by default.