* Enter the name of the utility key. You can search descriptions of utility keys.

Centering (Duplex 2nd Side)

To display: [Utility][Administrator Settings][System Settings][Expert Adjustment][Printer Adjustment][Centering (Duplex 2nd Side)]

Adjust the print start position at the left edge of the paper relative to the paper discharge direction for printing the back side in 2-sided printing.

Press the Start key to print a test pattern. Check the test pattern, then, if necessary, repeatedly adjust so that the margin between the left edge and the print starting position is 3/16 inches (4.2 mm) (plus or minus 1/32 inches (plus or minus 0.5 mm)).

Settings

Description

[Select Tray]

Select a paper tray that is used to adjust the start position for printing.

[Adjust Value]

Enter an adjustment value between -3.0 and 3.0 mm by tapping [-] and [+].

[0.0 mm] is specified by default.

Tips
  • Only 8-1/2 by 11 long edge feed (A4 long edge feed) paper can be used for adjusting the Bypass Tray.