Creating a Serverless Pull Printing Group
Create a serverless pull printing group on an MFP that is not set to a serverless pull printing group.
Up to 10 MFPs can be specified in one serverless pull printing group. Multiple serverless pull printing groups can be created.
Click [Create a Group].
Enter the name of the serverless pull printing group in [Group name], select the check box of the MFP to be set to a serverless pull printing group, then click [OK].
Enter the MFP administrator password and the OpenAPI user name and password, then click [OK].
When not using the user name and password for OpenAPI authentication, only enter the administrator password.
A serverless pull printing group is created.
Click [Close].
A serverless pull printing group cannot be structured over WAN.
To use the main unit for which [Network Settings] - [Network I/F Configuration] is set to [Wired + Wireless (Secondary Mode)], [Wired + Wireless (Primary Mode)], or [Wired + Wireless (Wi-Fi Direct)] as the storage machine for serverless pull printing , set a serverless pull printing group to the wired network interface of the storage machine.
The default administrator password and the default OpenAPI user name and password can be pre-specified in [Administrator Settings] of LK-114_SetupTool. For details, refer to [Administrator settings of LK-114_SetupTool] .
When composing a serverless pull printing group involving different models, you need to permit the quick authentication. For details on how to permit the quick authentication, refer to [Permitting the quick authentication] .
A serverless pull printing group can be created in a local environment in which the MFP is not connected to the network. For details, refer to [Creating a serverless pull printing group configuration file in a local environment] .