MFP settings

Registering the i-Option LK-114 license

To enable the serverless pull printing function on the MFP, register the i-Option LK-114 license.

For details on license registration, refer to [License Registration] .

Enabling the OpenAPI function

Enable the OpenAPI function on the MFP.

  1. Tap [Utility] - [Administrator Settings] - [System Connection] - [OpenAPI Settings] - [Access Setting].

  2. Select [Allow], then tap [OK].

Reference

  • If you change the SSL Enable/Disable status in [SSL/Port Settings] of [OpenAPI Settings] after serverless pull printing settings have been completed, reconfigure settings using LK-114_SetupTool.

MFP authentication settings

Configure the user authentication method for the MFP.

On the MFP, select [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [General Settings] - [User Authentication], then specify one of the following authentication methods.

  • MFP authentication

  • External server authentication

  • MFP authentication + External server authentication (Destination: MFP)

  • MFP authentication + External server authentication (Destination: External server)

  • Enhanced server authentication

  • MFP authentication + Enhanced server authentication (Destination: MFP)

  • MFP authentication + Enhanced server authentication (Destination: Enhanced server)

  • Enhanced server authentication + External server authentication (Destination: External server)

Tips

  • Set the same authentication method to all MFPs that make up a serverless pull printing group.

Reference

  • To perform the external server authentication using the IC card, you need to permit the quick authentication. For details on how to permit the quick authentication, refer to [Permitting the quick authentication] .

Permitting the quick authentication

When composing a serverless pull printing group involving different models, permit the quick authentication.

  1. Tap [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [Simple Auth. setting] - [Authentication Setting].

  2. Select [Allow], then tap [OK].

Tips

  • To use Data Administrator for settings, double-click Device on the device list, click [Authentication Settings] - [Simple Print Authentication], then select the [Enable Simple Print Authentication] check box.