Restricting the firmware update using a USB memory with a password

Configure settings to prompt password entry when the service representative updates firmware of this machine using a USB memory.

In the administrator mode, select [Security] - [FW Update (USB) Permission Setting], then configure the following settings.

Settings

Description

[USB Update]

When prompting password entry to update firmware of this machine using a USB memory, select [Password Priority].

Selecting [USB Connection Permission Setting Preference] applies the setting that is configured by selecting [Security] - [USB Connection Permission setting] - [External Memory (Service)] - [Firmware Update] in the administrator mode.

[USB Connection Permission Setting Preference] is specified by default.

[Password]/[Retype Password]

When [Password Priority] is selected in [USB Update], enter the password (using up to 20 characters) to allow firmware updating using a USB memory.

To enter (change) the password, select the [Password is changed.] check box, then enter a new password.