Controlling the access to this machine by IP address
IPv4 address filtering
The computers' access to this machine can be controlled via IP address. This is called "IP address filtering."
You can specify both IPv4 addresses that are allowed to access this machine and those refused to access the machine.
In the administrator mode, select [Network] - [TCP/IP Setting] - [IPv4 Filtering], then configure the following settings.
Settings | Description |
|---|---|
[Permit Access] | Select [Enable] to specify IPv4 addresses that allow access. Also enter the range of IPv4 addresses that allow access. To allow access from a single IPv4 address, you can only enter the address in one side of the range.
[Disable] is specified by default. |
[Deny Access] | Select [Enable] to specify IPv4 addresses refused to access. Also enter the range of IPv4 addresses. To refuse access from a single IPv4 address, you can only enter the address in one side of the range.
[Disable] is specified by default. |
Example of entry: IPv6 address filtering
The computers' access to this machine can be controlled via IP address. This is called "IP address filtering."
You can specify both IPv6 addresses that are allowed to access this machine and those refused to access the machine.
In the administrator mode, select [Network] - [TCP/IP Setting] - [IPv6 Filtering], then configure the following settings.
Settings | Description |
|---|---|
[Permit Access] | Select [Enable] to specify IPv6 addresses that allow access. Also enter the range of IPv6 addresses that allow access. Prefix-specified format: ****:****:****:****:****:****:****:****/@ Available range for entering asterisk "*": Hexadecimal characters Available range for entering symbol "@": 3 to 128 [Disable] is specified by default. |
[Deny Access] | Select [Enable] to specify IPv6 addresses refused to access. Also enter the range of IPv6 addresses. Prefix-specified format: ****:****:****:****:****:****:****:****/@ Available range for entering asterisk "*": Hexadecimal characters Available range for entering symbol "@": 3 to 128 [Disable] is specified by default. |