Using the machine WebDAV server for association

Overview

To use application software with which the WebDAV server of this machine is used to communicate, configure the WebDAV server function.

If a certificate for this machine is registered, you can encrypt communication between the machine and application software using SSL.

To use the WebDAV server of this machine for the association, follow the below procedure to configure the settings.

  1. Configure settings for connecting to the network such as setting of the IP address of this machine

    supplementary explanationFor details on configuring the setting, refer to [Configuring network environment settings] .

  2. Configure the WebDAV server settings

    supplementary explanationFor details on configuring the setting, refer to [Configuring the WebDAV server settings] .

  3. Set the following options according to your environment

    Purpose

    Reference

    Encrypting communication between this machine and application software with SSL.

    [Using SSL communication]

Configuring the WebDAV server settings

Enable the WebDAV server. Also set an access right to the WebDAV server.

In the administrator mode, select [Network] - [WebDAV Settings] - [WebDAV Server Settings], then configure the following settings.

Settings

Description

[WebDAV Settings]

Select [ON] to use the WebDAV server.

[ON] is specified by default.

[Access Rights Settings]

Specify the password to restrict accesses to the WebDAV server of this machine (using up to 64 characters, excluding ").

To enter (change) the password, select the [Password is changed.] check box, then enter a new password.

Clicking [Initial Password] resets the set password (Default: sysadm).

[OFF] (not selected) is specified by default.

Using SSL communication

Encrypt communication between this machine and the WebDAV client application with SSL.

  1. Register a certificate for this machine and enable SSL communication.

    supplementary explanationFor details, refer to [Creating a certificate for this machine to communicate via SSL] .

  2. In the administrator mode, select [Network] - [WebDAV Settings] - [WebDAV Server Settings], and set [SSL Setting] to [SSL Only] or [SSL/Non-SSL] (Default: [Non-SSL Only]).